Parametric Investigation of Leading-Edge Slats on a Blended-Wing-Body UAV Using the Taguchi Method
Open Access
Abstract
The current study investigated the effect of leading-edge slats on the longitudinal stability at high angles of attack of a Blended-Wing-Body (BWB) Unmanned Air Vehicle (UAV). Using a Design of Experiments (DOE) approach and, specifically, the Taguchi method, four leading-edge slat design parameters were investigated on three different levels. These parameters were the slat semi-span, the rotation of the slat element, the extension forward of the leading edge and the downward drop below the leading edge. An L9 orthogonal array (OA) was used to investigate the influence of these key design parameters using three performance criteria, namely the angle at which pitch break occurs, the corresponding speed and the distance between the Neutral point of each configuration and the Neutral point of the reference platform. The investigation was conducted by using high-fidelity Computational Fluid Dynamics (CFD) methods for each of the nine configurations defined by the L9 OA, over a range of angles of attack between −4 and 16 degrees. Based on these results, and using a Signal-to-Noise ratio (SNR) analysis, two combinations were eventually derived, one that optimized pitch break angle and speed and one that optimized longitudinal stability. Finally, the Pareto Analysis of Variance (ANOVA) technique was conducted to define the contribution of each of the six design parameters on the selected performance criteria. More specifically, the semi-span seemed to have the most significant effect on pitch break angle and speed, whereas the rotation of the slat element was the most important parameter with regard to static stability.Keywords
Funding Information
- Hellenic Foundation for Research and Innovation (00745, 6179)
This publication has 21 references indexed in Scilit:
- Preliminary Sizing Correlations for Fixed-Wing Unmanned Aerial Vehicle CharacteristicsJournal of Aircraft, 2018
- Aerodynamic Design of a Flying V Aircraft2017
- Aerodynamic Design of Blended Wing-Body and Lifting-Fuselage Aircraft2016
- Optimization of process parameters in drilling of GFRP composite using Taguchi methodJournal of Materials Research and Technology, 2014
- Effect of Flap and Slat Riggings on 2-D High-Lift AerodynamicsJournal of Aircraft, 2006
- Spanwise Lift Distribution for Blended Wing Body Aircraft.Journal of Aircraft, 2005
- Transition Prediction on the Slat of a High-Lift SystemJournal of Aircraft, 2004
- Design of the Blended Wing Body Subsonic TransportJournal of Aircraft, 2004
- Blended-wing-body optimization problem setup2000
- A one-equation turbulence model for aerodynamic flows1992