Soft core–hard shell latex particles for mechanically strong VOC‐free polymer films
- 7 February 2019
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (23)
Abstract
Polymer films cast from aqueous polymer dispersions typically suffer from an inherent lack of mechanical strength when compared to their solvent‐borne counterparts. This drawback can be overcome by the use nanostructured hybrid particles that contain both a hard and soft phase. In this work, we demonstrate the use latex particles consisting of a soft core with a multilobed hard shell synthesized by seeded semicontinuous emulsion polymerization with the aim of maximizing the interconnectivity of the hard phase in the resulting polymer film, thus generating films with improved mechanical properties. Films with a minimum film formation temperature (MFFT) close to that of the soft phase are formed while obtaining a Young's modulus up to 4.5 times higher that of a standard homogeneous latex particle. The effect of annealing temperature on film morphology is also investigated, clearly demonstrating that a marked difference in mechanical properties is observed when a percolating network of the hard phase within the film is obtained. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47608.Keywords
Funding Information
- Ministry of Economy and Competitiveness of Spain (IJCI-2016-28442)
- Industrial Liaison Program in Polymerization in Dispersed Media
This publication has 41 references indexed in Scilit:
- Volatile chemical products emerging as largest petrochemical source of urban organic emissionsScience, 2018
- Design colloidal particle morphology and self-assembly for coating applicationsChemical Society Reviews, 2017
- Effect of a coalescing aid on the earliest stages of polymer diffusion in poly(butyl acrylate-co-methyl methacrylate) latex filmsPolymer, 2011
- Fundamentals of Latex Film Formation2010
- Cracking in Soft−Hard Latex Blends: Theory and ExperimentsLangmuir, 2008
- Film formation from polystyrene–poly(butyl acrylate‐co‐methyl methacrylate) latex blendsPolymer Composites, 2006
- Thermodynamics and Morphology of Latex Blend FilmsMacromolecules, 2003
- Film formation of latexMaterials Science and Engineering: R: Reports, 1997
- Mechanistic considerations of particle size effects on film properties of hard/soft latex blendsJournal of Coatings Technology, 1997
- Polymer Blend Latex Films: Morphology and TransparencyMacromolecules, 1995