Creep and Rupture Properties of Carbon Steels
Authors:
- 1 June 1960
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers
- Vol. 174 (1) , 745-768
Abstract
In earlier N.P.L. work on the strength of carbon steels at high temperatures, steels showing ‘normal’ and ‘abnormal’ creep properties were assessed from tests extending to 1000 hours. Further results on the same steels indicate that the order of merit of these particular steels is not altered in tests extending to 100 000 hours. The rupture properties of carbon steels are reviewed in the light of the N.P.L. results and other published data. A wide range of strength properties is shown to exist. The pattern of results, however, appears reasonably consistent. At the lower end of the strength scale are almost pure irons and at the upper end are steels of moderate carbon content and not low in manganese and silicon. Heavy deoxidation with aluminium of conventional carbon steels results in lower creep and rupture properties than are observed in similar steels deoxidized with silicon; the part played by nitrogen in this effect is considered. The rupture ductility of carbon steels is discussed and in the types covered by the N.P.L. researches, low ductility in long-time service appears unlikely. Further work required in this field is considered and the need for long-time, low-strain creep properties of mild steels for use in nuclear power plants is emphasized.Keywords
This publication has 8 references indexed in Scilit:
- Elevated-Temperature Properties of Carbon Steels1955
- Influence of Aluminum and Silicon Deoxidation on The Strain Aging of Low-Carbon SteelsJOM, 1953
- Creep Properties of Steels Utilized in High-Pressure and High-Temperature Superheater and Steam Pipe Practice. Part III: Revision of Long-Time Creep Data for a Carbon Steel Header and a Carbon—Molybdenum Steel PipeProceedings of the Institution of Mechanical Engineers, Part B: Management and engineering manufacture, 1953
- High-Temperature Stress-Rupture Testing of Tubular SpecimensJournal of Fluids Engineering, 1952
- A Comparison of Some Carbon Steels on the Basis of Various Creep LimitsProceedings of the Institution of Mechanical Engineers, 1945
- Creep Properties of Steels Utilized in High-Pressure and High-Temperature Superheater and Steam Pipe Practice. Part I: Carbon SteelsProceedings of the Institution of Mechanical Engineers, 1944
- Properties of Steels as a Basis for Design for High-Temperature Service. Part I: Carbon SteelsProceedings of the Institution of Mechanical Engineers, 1940
- Steels for High-Temperature ServiceProceedings of the Institution of Mechanical Engineers, 1939