Modern Computational and Experimental Approaches to Assessing the Mechanical Properties of Porous PEDOT:PSS Particles
Authors:
- 1 April 2026
- journal article
- research article
- Published by Pleiades Publishing Ltd in Nanobiotechnology Reports
- Vol. 21 (2) , 181-188
Abstract
Porous conductive microparticles based on poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) (PEDOT:PSS) are promising fillers for modern composite materials. However, description of their mechanical properties is a complex task due to the developed highly porous structure and the impossibility of manufacturing standardized samples. In this paper, a hybrid computational-experimental method for determining the mechanical constants of individual porous PEDOT:PSS macroparticles is proposed and verified in a full-scale experiment. Spherical particles with a porosity of more than 95% were obtained by freeze-drying. The particle morphology was visualized using scanning electron microscopy. Mechanical compression tests between parallel plates were carried out. The mechanical constants of the material were determined using inverse finite element analysis. The solution to the reverse engineering problem is performed in axisymmetric conditions, and an assumption is made about a bilinear model of material deformation. Based on the experimental curves, Young’s modulus, Poisson’s ratio, yield strength and tangent modulus were determined. Verification of the model on particles of larger diameter showed good correspondence between the predicted numerical and experimental data. The obtained results confirm the adequacy of the proposed approach to the use of inverse finite element analysis to describe the mechanical behavior of porous particles at the macro level and allow one to determine a set of constants that can be used for further design and calculation of products made of composite materials based on PEDOT:PSS.Keywords
This publication has 28 references indexed in Scilit:
- Revolutionizing neural regeneration with smart responsive materials: Current insights and future prospectsBioactive Materials, 2025
- Highly Porous Particles of Cellulose Derivatives for Advanced ApplicationsChempluschem, 2024
- Electrorheological behavior of cellulose in silicon oil. The effect of filler morphologyCellulose, 2024
- Advancements in tailoring PEDOT: PSS properties for bioelectronic applications: A comprehensive reviewMaterials Science and Engineering: C, 2023
- Biomechanical behaviour of PEDOT:PSS-based hydrogels as an electrode for stent integrated enzyme biofuel cellsHeliyon, 2022
- Porous PEDOT:PSS Particles and their Application as Tunable Cell Culture SubstrateAdvanced Materials Technologies, 2021
- Enhanced electrorheological activity of porous chitosan particlesCarbohydrate Polymers, 2021
- Fabrication and electric stimuli-response of semiconducting poly(3,4-ethylenedioxythiophene)/silica nanocomposite particlesEuropean Polymer Journal, 2018
- Highly porous scaffolds of PEDOT:PSS for bone tissue engineeringActa Biomaterialia, 2017
- Application of the Johnson–Kendall–Roberts model in AFM-based mechanical measurements on cells and gel.Colloids and Surfaces B: Biointerfaces, 2015