Multi-Wall Carbon Nanotubes Chemically Grafted and Physically Adsorpted on Reinforcing Carbon Fibres
Open Access
- 1 May 2008
- journal article
- research article
- Published by SAGE Publications in Advanced Composites Letters
- Vol. 17 (3)
Abstract
Carbon nanotubes (CNTs) because of their properties are alleged to be the key candidate additives for improving the mechanical properties of polymers and carbon fibre reinforced polymers (CFRPs). Nevertheless in order for the reinforcing effect of the nanotubes to be of practical use, the CNTs have to be mixed with the matrix material. In the current work an effort was made to chemically graft Multi-Wall Carbon Nanotubes (MWCNTs) on the actual reinforcing Carbon Fibres (CFs) in order to skip the sometimes complex mixing stage. Two different solutions were used in order to treat/prepare the CNTs; a) an acid solution of H 2 SO 4 /HNO 3 and, b) a toluene solution. The treated CFs were added to each solution, sonic bathed with deionised water and then dried in an oven. The resulting CFs were examined under SEM and both the solutions used proved to be reasonable successful with further investigation/optimisation to be necessary.Keywords
This publication has 12 references indexed in Scilit:
- Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibersCarbon, 2007
- Multiscale Carbon Nanotube−Carbon Fiber Reinforcement for Advanced Epoxy CompositesLangmuir, 2007
- Enhancement of interfacial adhesion and dynamic mechanical properties of poly(methyl methacrylate)/multiwalled carbon nanotube composites with amine-terminated poly(ethylene oxide)Carbon, 2006
- Anchorage of carbon nanotubes grown on carbon fibresCarbon, 2006
- A critical review on nanotube and nanotube/nanoclay related polymer composite materialsComposites Part B: Engineering, 2006
- Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube contentComposites Science and Technology, 2004
- Functionalisation effect on the thermo-mechanical behaviour of multi-wall carbon nanotube/epoxy-compositesComposites Science and Technology, 2004
- Carbon nanotube/carbon fiber hybrid multiscale compositesJournal of Applied Physics, 2002
- Fibers from polypropylene/nano carbon fiber compositesPolymer, 2002
- Advances in the science and technology of carbon nanotubes and their composites: a reviewComposites Science and Technology, 2001