Removal of Colloidal Silica from Water with Anion Exchange Resins

Authors:

Abstract
This study describes the dissolved state of colloidal silica in water and its adsorption properties on anion exchange resins (AERs) . A colloidal silica solution of 3% was prepared by ion exchange resin method from a sodium silicate solution. The colloidal silica in water formed about 10 nm particles in diameter. When leaving the colloidal silica solution at less than pH=7, the gelation was occurred. The gelation rate became the fastest at pH=5.2. The adsorption properties of colloidal silica on various AERs were .investigated in batch adsorption. When added strong base anion exchange resins (SBAERs) to the colloidal silica solutions of about 560 μg/mL as SiO2, the colloidal silica concentration in water decreased rapidly, at the same time, ionic silica was newly generated on the resin surface. The total amounts of silica removed by SBAERs became larger than the stoichiometrically removable amount of ionic silica by them. According to the scanning electron microscopic observation, colloidal silica adsorbed on the surface of SBAERs became to dissolve to the resin inside with the elapse of time. These results suggest that colloidal silica adsorbed on SBAERs should exist in concentrated state inside of the resins and in ionic silica at the ion exchange sites.