Study on Ultrasonic Response to Mechanical Structure of Coal under Loading and Unloading Condition
Open Access
- 1 January 2017
- journal article
- research article
- Published by Wiley in Shock and Vibration
- Vol. 2017, 1-12
Abstract
Ultrasonic technology can be applied to study the changes in the internal defects of coal under quantitative loading, which can provide the theoretical basis for applying the technology to determine the structural stability of coal and predict disasters related to the dynamics of coal or rock. In this paper, to investigate the propagation laws of ultrasonic signals through a coal material under various loading conditions, an ultrasonic test system for the deformation and fracture of coal rock was used and a cyclic loading and unloading pattern is adopted. In addition, changes in ultrasonic parameters such as amplitude, dominant frequency, and velocity were analyzed. At the initial loading stage, the ultrasonic amplitude, amplitude of the dominant frequency, and wave velocity slightly decrease as the loading process progresses, and these three ultrasonic parameters gradually increase to their maxima when the stress level reaches approximately 46%. When it progresses from the linear elastic stage to the elastic plastic stage, the material inside the coal distorts and fractures more drastically, the inner defects are fully developed, and the acoustic parameters decrease significantly. Therefore, the corresponding measures should be adapted to reduce the loading stress before the coal is loaded to its critical stress level.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (2014ZDPY23, 2014ZY001, 2016YFC0801401)
- China University of Mining and Technology (2014ZDPY23, 2014ZY001, 2016YFC0801401)
- State Key Research Development Program of China (2014ZDPY23, 2014ZY001, 2016YFC0801401)
- Priority Academic Program Development of Jiangsu Higher Education Institutions (2014ZDPY23, 2014ZY001, 2016YFC0801401)
This publication has 23 references indexed in Scilit:
- Evaluation of treated and un-treated Nubia Sandstone using ultrasonic as a non-destructive techniqueJournal of Archaeological Science, 2013
- Effects of sonic speed on location accuracy of acoustic emission source in rocksTransactions of Nonferrous Metals Society of China, 2011
- Fractal property of spatial distribution of acoustic emissions during the failure process of bedded rock saltInternational Journal of Rock Mechanics and Mining Sciences, 2011
- p-Wave Reflection Imaging of Submerged Soil Models Using UltrasoundJournal of Geotechnical and Geoenvironmental Engineering, 2010
- Sonic to ultrasonic Q of sandstones and limestones: Laboratory measurements at in situ pressuresGeophysics, 2009
- The Kaiser effect in rocks: principles and stress estimation techniquesInternational Journal of Rock Mechanics and Mining Sciences, 2003
- Comparison between experimental results and theoretical predictions for P-wave velocity and attenuation at ultrasonic frequencyWave Motion, 2003
- Changes in infrared radiation with rock deformationInternational Journal of Rock Mechanics and Mining Sciences, 2002
- Wavelet transform of acoustic emission signals in failure of model compositesEngineering Fracture Mechanics, 2002
- Changes in in situ ultrasonic properties of rock on strain relaxationInternational Journal of Rock Mechanics and Mining Sciences, 1984