Hydro‐Mechanical Measurements of Sheared Crystalline Rock Fractures With Applications for EGS Collab Experiments 1 and 2
Open Access
- 1 February 2022
- journal article
- research article
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 127 (2)
Abstract
We present hydro‐mechanical measurements that characterize shear on natural fractures in schist, amphibolite, and rhyolite specimens from the enhanced geothermal system (EGS) Collab Project's Experiment 1 and 2 sites (E1 and E2) at the Sanford Underground Research Facility. We employed a triaxial direct shear method augmented with X‐ray imaging to perform hydroshearing (injection‐induced shearing) and mechanical shearing on naturally fractured specimens at in situ stress conditions. Measurements included fracture permeability, strength, stress‐dependent aperture, shear dilation, and frictional strength. Results reveal that in situ natural fractures must be permeable, weak, and shear‐oriented to be hydrosheared, and only a subset of the observable in situ fractures were suitable. When sheared, the fracture permeability typically increased by a factor of 10 or more and this increase was retained over time. However, shear slip did not always result in permeability increase. High phyllosilicate content associated with exceptionally weak fractures exhibited poor or even decreased permeability after stimulation. These measurements in combination with site data were used to conduct a slip‐tendency analysis for different fracture sets, and we selected the top candidate natural fractures for hydroshearing at the EGS Collab sites. We also found that the lower in situ shear stress and stronger fractures at the E2 site make hydroshearing more challenging than at the E1 site. Overall, the methods and analysis used in our work can be applied to any geothermal project to identify in situ joint sets that are best suited for hydroshearing, which in turn can help to optimize well placement and energy production.Keywords
This publication has 49 references indexed in Scilit:
- Experimental and numerical study of the geometrical and hydraulic characteristics of a single rock fracture during shearInternational Journal of Rock Mechanics and Mining Sciences, 2011
- Structure of the low permeable naturally fractured geothermal reservoir at SoultzComptes Rendus. Géoscience, 2009
- Dependence of displacement–length scaling relations for fractures and deformation bands on the volumetric changes across themJournal of Structural Geology, 2008
- Mechanical and hydraulic coupling of injection-induced slip along pre-existing fracturesGeothermics, 2008
- Single fractures under normal stress: The relation between fracture specific stiffness and fluid flowInternational Journal of Rock Mechanics and Mining Sciences, 2000
- Development of a shear-flow test apparatus and determination of coupled properties for a single rock jointInternational Journal of Rock Mechanics and Mining Sciences, 1999
- Anisotropy of flow in a fracture undergoing shear and its relationship to the direction of shearing and injection pressureInternational Journal of Rock Mechanics and Mining Sciences, 1997
- On the relationship between mechanical and hydraulic apertures in rough‐walled fracturesJournal of Geophysical Research, 1995
- Scaling of the critical slip distance for seismic faulting with shear strain in fault zonesNature, 1993
- Strength, deformation and conductivity coupling of rock jointsInternational Journal of Rock Mechanics and Mining Sciences, 1985