In situ study of microstructural evolution of borosilicate glass–sulfate mixture at high temperatures
Authors:
- 22 April 2024
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 107 (8) , 5274-5284
Abstract
Microstructural evolution of borosilicate glass–sulfate (BaSO 4 or Na 2 SO 4 ) mixture was observed in situ using a high‐temperature confocal scanning laser microscope. The phase compositions and sulfate retention of the mixture at different temperatures were also examined. The results indicate that for the glass–BaSO 4 sample (abbreviated as BS), the borosilicate glass begins to melt at about 900°C, and the triangular BaSO 4 crystals grow obviously between 900°C and 1100°C. At temperatures above 1100°C, the BaSO 4 crystals gradually melt and decompose. For the glass–Na 2 SO 4 sample (abbreviated as NS), strip‐shaped BaSO 4 crystals begin to form at about 820°C after the borosilicate glass melting, and then gradually melt with further increasing temperature. When the temperature increases to 1000°C, the upper layer of the NS sample possesses Na 2 SO 4 , LiNaSO 4 , and BaSO 4 phases, while the lower layer possesses an amorphous phase. Moreover, the SO 3 retention in the BS sample remains almost unchanged with temperature increases from 900°C to 1100°C, and then decreases with further increasing temperature. The SO 3 retention retained in the NS sample decreases rapidly at temperatures above 900°C. These findings can provide a guidance for vitrifying sulfur‐rich high‐level liquid waste.Keywords
Funding Information
- National Defense Basic Scientific Research Program of China (23zg6102)
- National Natural Science Foundation of China (12375316)
This publication has 17 references indexed in Scilit:
- Effects of Ba(NO3)2 content on yellow phase formation and chemical durability of vitrified waste glassJournal of Non-Crystalline Solids, 2022
- Role of Ba(NO3) pretreatment in reducing the yellow phase formation during vitrification of nuclear wasteJournal of Nuclear Materials, 2021
- Machine Learning Enabled Models to Predict Sulfur Solubility in Nuclear Waste GlassesACS Applied Materials & Interfaces, 2021
- Neutron Diffraction and Raman Studies of the Incorporation of Sulfate in Silicate GlassesThe Journal of Physical Chemistry C, 2020
- InorganicBa–Snnanocomposite materials for sulfate sequestration from complex aqueous solutionsEnvironmental Science: Nano, 2018
- Modelling the sulfate capacity of simulated radioactive waste borosilicate glassesJournal of Alloys and Compounds, 2017
- Sulfur behavior in silicate glasses and melts: Implications for sulfate incorporation in nuclear waste glasses as a function of alkali cation and V2O5 contentJournal of Non-Crystalline Solids, 2007
- Barium borosilicate glass – a potential matrix for immobilization of sulfate bearing high-level radioactive liquid wasteJournal of Nuclear Materials, 2006
- Solubility and speciation of sulfur in silicate melts: The Conjugated Toop-Samis-Flood-Grjotheim (CTSFG) modelGeochimica et Cosmochimica Acta, 2005
- Raman studies of sulfur in borosilicate waste glasses: sulfate environmentsJournal of Non-Crystalline Solids, 2001