Buckled MEMS Beams for Energy Harvesting from Low Frequency Vibrations
Authors:
Open Access
- 1 January 2019
- journal article
- research article
- Published by American Association for the Advancement of Science (AAAS) in Research
- Vol. 2019, 1087946
Abstract
Vibration energy harvesters based on the resonance of the beam structure work effectively only when the operating frequency window of the beam resonance matches with the available vibration source. None of the resonating MEMS structures can operate with low frequency, low amplitude, and unpredictable ambient vibrations since the resonant frequency goes up very high as the structure gets smaller. Bistable buckled beam energy harvester is therefore developed for lowering the operating frequency window below 100Hz for the first time at the MEMS scale. This design does not rely on the resonance of the MEMS structure but operates with the large snapping motion of the beam at very low frequencies when input energy overcomes an energy threshold. A fully functional piezoelectric MEMS energy harvester is designed, monolithically fabricated, and tested. An electromechanical lumped parameter model is developed to analyze the nonlinear dynamics and to guide the design of the nonlinear oscillator based energy harvester. Multilayer beam structure with residual stress induced buckling is achieved through the progressive residual stress control of the deposition processes along the fabrication steps. Surface profile of the released device shows bistable buckling of 200 μ m which matches well with the amount of buckling designed. Dynamic testing demonstrates the energy harvester operates with 50% bandwidth under 70Hz at 0.5g input, operating conditions that have not been demonstrated by MEMS vibration energy harvesters before.Keywords
Funding Information
- MIT-SUTD International Design Center
This publication has 34 references indexed in Scilit:
- A new S-shaped MEMS PZT cantilever for energy harvesting from low frequency vibrations below 30 HzMicrosystem Technologies, 2012
- Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with electromechanical couplingJournal of Sound and Vibration, 2011
- Fabrication and characterization of a wideband MEMS energy harvester utilizing nonlinear springsJournal of Micromechanics and Microengineering, 2010
- Resonator with magnetically adjustable natural frequency for vibration energy harvestingSensors and Actuators A: Physical, 2010
- Energy Harvesting From Vibrations With a Nonlinear OscillatorJournal of Vibration and Acoustics, 2010
- Low-frequency two-dimensional resonators for vibrational micro energy harvestingJournal of Micromechanics and Microengineering, 2010
- A piezomagnetoelastic structure for broadband vibration energy harvestingApplied Physics Letters, 2009
- Design of mechanical band-pass filters for energy scavengingJournal of Sound and Vibration, 2006
- A Curved-Beam Bistable MechanismJournal of Microelectromechanical Systems, 2004
- A magnetoelastic strange attractorJournal of Sound and Vibration, 1979