Synthesis of Novel Shape Memory Thermoplastic Polyurethanes (SMTPUs) from Bio-Based Materials for Application in 3D/4D Printing Filaments
Open Access
Abstract
Bio-based thermoplastic polyurethanes have attracted increasing attention as advanced shape memory materials. Using the prepolymer method, novel fast-responding shape memory thermoplastic polyurethanes (SMTPUs) were prepared from 100% bio-based polyester polyol, poly-propylene succinate derived from corn oil, diphenyl methane diisocyanate, and bio-based 1,3-propanediol as a chain extender. The morphologies of the SMTPUs were investigated by Fourier transform infrared spectroscopy, atomic force microscopy, and X-ray diffraction, which revealed the interdomain spacing between the hard and soft phases, the degree of phase separation, and the intermixing level between the hard and soft phases. The thermal and mechanical properties of the SMTPUs were also investigated, wherein a high hard segment content imparted unique properties that rendered the SMTPUs suitable for shape memory applications at varying temperatures. More specifically, the SMTPUs exhibited a high level of elastic elongation and good mechanical strength. Following compositional optimization, a tensile strength of 24–27 MPa was achieved, in addition to an elongation at break of 358–552% and a hardness of 84–92 Shore A. Moreover, the bio-based SMTPU exhibited a shape recovery of 100%, thereby indicating its potential for use as an advanced temperature-dependent shape memory material with an excellent shape recoverability.Keywords
Funding Information
- National Research Foundation of Korea (2021R1A4A1022059)
This publication has 63 references indexed in Scilit:
- Synthesis and Characterization of Polyurethane‐Based Shape‐Memory Polymers for Tailored Tg around Body Temperature for Medical ApplicationsMacromolecular Chemistry and Physics, 2011
- Recent advances and challenges in designing stimuli-responsive polymersProgress in Polymer Science, 2010
- Physical Properties of Polyurethane Plastic Sheets Produced from Polyols from Canola OilBiomacromolecules, 2007
- Uncatalyzed synthesis, thermal and mechanical properties of polyurethanes based on poly(-caprolactone) and 1,4-butane diisocyanate with uniform hard segmentBiomaterials, 2005
- Origin of Multiple Melting Endotherms in a High Hard Block Content Polyurethane. 1. Thermodynamic InvestigationMacromolecules, 2001
- Comparison of properties of thermoplastic polyurethane elastomers with two different soft segmentsJournal of Applied Polymer Science, 1998
- Dynamics of (micro)phase separation during fast, bulk copolymerization: some synchrotron SAXS experimentsMacromolecules, 1991
- Simultaneous SAXS-DSC study of multiple endothermic behavior in polyether-based polyurethane block copolymersMacromolecules, 1986
- Infrared Studies of Hydrogen Bonding in Toluene Diisocyanate Based PolyurethanesMacromolecules, 1975
- Thermal Analysis of Polyurethane Block PolymersMacromolecules, 1973