Lamb wave (A0 mode) scattering directionality at defects
Author:
- 1 January 2017
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
Abstract
Localized and distributed guided ultrasonic waves array systems offer an efficient way for the structural health monitoring of large structures. The detection sensitivity for fatigue cracks depends on the orientation of the crack relative to the location of the sensor elements. Crack-like defects have a directionality pattern of the scattered field depending on the angle of the incident wave relative to the defect orientation and on the ratio of the defect depth and length to the wavelength. From FE simulations it has been shown that for cracks and notches almost no energy is scattered in certain directions from the defect, i.e., the data processing algorithm must take into account that for some transducer combinations no change in the signal even for a significant defect will be detected. The scattered wave field directionality pattern for an incident low frequency A0 Lamb wave mode was predicted from 3D Finite Element simulations and verified from experimental measurements at machined part-through and through-thickness notches using a laser interferometer. Good agreement was found and the directionality pattern can be predicted accurately. The amplitude of the scattered wave was quantified for a systematic variation of the angle of the incident wave relative to the defect orientation, the defect depth, and the ratio of the characteristic defect size to the wavelength. Based on these results the detection sensitivity for crack-like defects in plate structures using guided wave sensor arrays can be quantified.Keywords
This publication has 18 references indexed in Scilit:
- In-situ monitoring of fatigue crack growth using high frequency guided wavesNDT & E International, 2015
- High frequency guided ultrasonic waves for hidden fatigue crack growth monitoring in multi-layer model aerospace structuresSmart Materials and Structures, 2015
- High-frequency guided ultrasonic waves for hidden defect detection in multi-layered aircraft structuresUltrasonics, 2014
- Guided Wave Damage Characterization via Minimum Variance Imaging with a Distributed Array of Ultrasonic SensorsJournal of Nondestructive Evaluation, 2013
- Fatigue crack growth monitoring using high-frequency guided wavesStructural Health Monitoring, 2013
- Feature-guided waves for monitoring adhesive shear modulus in bonded stiffenersNDT & E International, 2013
- MONITORING OF PLATE STRUCTURES USING GUIDED ULTRASONIC WAVESAIP Conference Proceedings, 2008
- IN-SITU MONITORING OF FATIGUE CRACK GROWTH AT FASTENER HOLES USING RAYLEIGH-LIKE WAVESAIP Conference Proceedings, 2008
- Strategies for guided-wave structural health monitoringProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2007
- Guided wave signal processing and image fusion for in situ damage localization in platesWave Motion, 2007