FDM Parameters Optimization for Improving Tensile Strength using Response Surface Methodology and Particle Swarm Optimization
Open Access
- 30 January 2024
- journal article
- Published by Akademia Baru Publishing in Journal of Advanced Research in Applied Sciences and Engineering Technology
- Vol. 38 (2) , 112-128
Abstract
Fused deposition modelling (FDM) is a popular 3D printing technique that uses a thermoplastic filament as the build material. In FDM 3D printing, tensile strength can be an issue because the layers of the object are built on top of each other, and if the layers do not adhere properly, the object can be weak and prone to breaking. Typically, this problem is caused by incorrect parameter settings. Hence, this study was then carried out to analyse and improve the printing quality in term of tensile strength of the printed part using the response surface methodology (RSM) and the particle swarm optimization (PSO) method. The effect of four input parameters such as layer height, printing speed, infill density, and print temperature was examined on the tensile strength of polylactic acid (PLA) standard samples ASTM D638-IV. The experimental design was performed using face-centred central composite designs (FCCD). The experimental data were statistically analysed to form a regression model of the tensile strength. This model was used to approximate the actual process. The optimization was performed using desirability analysis from RSM and PSO to search for the optimal parameter for maximum tensile strength. Experimental results showed that PSO outperformed RSM with a 1.52 % reduction in tensile strength. The maximum tensile strength obtained from PSO was about 39.069 MPa with the optimal process parameters of layer height of 0.30 mm, printing speed of 30.17 m/s, infill density of 79.72 %, and print temperature of 205.92 °C.Keywords
This publication has 27 references indexed in Scilit:
- Optimization of 3D printed polylactic acid structures with different infill patterns using Taguchi-grey relational analysisAdvanced Industrial and Engineering Polymer Research, 2023
- Optimizing fused deposition modelling parameters based on the design for additive manufacturing to enhance product sustainabilityComputers in Industry, 2022
- Additive manufacturing of polypropylene micro and nano composites through fused filament fabrication for automotive repair applicationsPolymers for Advanced Technologies, 2022
- Fusion-bonding performance of short and continuous carbon fiber synergistic reinforced composites using fused filament fabricationComposites Part B: Engineering, 2022
- Fused deposition modeling: process, materials, parameters, properties, and applicationsThe International Journal of Advanced Manufacturing Technology, 2022
- Modelling and evolutionary computation optimization on FDM process for flexural strength using integrated approach RSM and PSOProgress in Additive Manufacturing, 2021
- Modeling and optimization of fused deposition modeling (FDM) process through printing PLA implants using adaptive neuro-fuzzy inference system (ANFIS) model and whale optimization algorithmJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
- Exercising hybrid statistical tools GA-RSM, GA-ANN and GA-ANFIS to optimize FDM process parameters for tensile strength improvementCIRP Journal of Manufacturing Science and Technology, 2020
- A hybrid PSO–BFO evolutionary algorithm for optimization of fused deposition modelling process parametersJournal of Intelligent Manufacturing, 2018
- Optimization of fused deposition modeling process parameters using a fuzzy inference system coupled with Taguchi philosophyAdvances in Manufacturing, 2017