Abstract
The flotation kinetics of Pb2+ ion with sodium dodecylsulfate (SDS) was studied with the aim of validating a model developed based on the considerations presented by Nicol et al. 1 Nicol, S. K. , Galvin, K. P. and Engel, M. D. 1992. Ion flotation‐potential applications to mineral processing. Minerals Engineering, 5(10–12): 1259–1275. [Google Scholar] . The study was conducted under experimental conditions similar to those used by Liu and Doyle 2 Liu, Z. and Doyle, F. M. 2001b. A thermodynamic approach to ion flotation. II. Metal ion selectivity in the SDS‐Cu‐Ca and SDS‐Cu‐Pb systems. Colloids and surfaces. A Physicochemical and Engineering Aspects, 178: 93–103. [Crossref] [Google Scholar] , namely, 1 L of solution at pH=4 containing 1×10−4 M Pb2+ and 0.4% v/v ethanol as frother; the metal:collector molar ratio was varied from 1:1 to 1:4. The experiments were performed in a 0.057 m diameter column using an air flow rate in the range of 6.1×10−5 to 12.2×10−5 m3/min. Results show the kinetics of the flotation is first order with respect to collector concentration (SDS), with a rate constant directly depending on the bubble surface area rate (Ab, m2/min), the slope of the adsorption isotherm of the surfactant onto the bubble‐liquid interface (a), and cross‐sectional area of the flotation cell (A), and inversely depending on the volume of the (well‐mixed) lead‐bearing solution.

This publication has 10 references indexed in Scilit: