RELATIVE IMPORTANCE OF VAPOUR DIFFUSION AND CONVECTTVE FLOW IN MODELLING OF SOFTWOOD DRYING
Author:
- 1 January 1998
- journal article
- research article
- Published by Taylor & Francis in Drying Technology
- Vol. 16 (1-2) , 271-281
Abstract
The influence of vapour diffusion on the drying rate of a softwood board has been examined for drying temperatures varying from 60°C to 140°C. It is found that for very low temperature drying a model which considers both vapour convective and diffusion in wood predicts dry-rate curves matching the experimental data closely. For high temperature drying, both of the above drying model and a drying model which considers only vapour convective flow give predictions in agreement with the observed data. This illustrates that the diffusion of vapour and air is important in low temperature drying panicularly during the late stages of drying. However, for high temperature drying, the convective flow of moisture vapour is dominant and the diffusion component is negligible. The observation provides evidence for simplifying a drying model for high temperature drying without reducing its credibility in predicting drying rate curves.Keywords
This publication has 5 references indexed in Scilit:
- Some Considerations In Simulation Of Superheated Steam Drying Of Softwood LumberDrying Technology, 1997
- Moisture content gradient in a softwood board during drying: simulation from a 2-D model and measurementWood Science and Technology, 1996
- External Heat and Mass Transfer Coefficients for Kiln Drying of TimberDrying Technology, 1996
- MOISTURE MOVEMENT IN SOFTWOOD TIMBER AT ELEVATED TEMPERATURESDrying Technology, 1994
- A mathematical model of drying for hygroscopic porous mediaAIChE Journal, 1986