Hydrostatic Journal Bearing With Porous Pads and Improved Properties
- 11 September 2019
- journal article
- research article
- Published by ASME International in Journal of Tribology
- Vol. 141 (12) , 1-36
Abstract
A hydrostatic journal bearing with porous pads to improve its performance is designed. The porous pads, which are embedded in recesses of the hydrostatic journal bearing, not only allow lubricant to flow through them but also form a complete cylindrical surface with the bearing land. The load capacity of the hydrostatic bearing is thus maintained and the hydrodynamic effects strengthened. A theoretical model of the porous pads bearing is tested with the simulation software, and the parameters that critically affect the bearing performance are studied. Thus, the results obtained indicate that the porous pads bearing has higher load capacity and higher stiffness than a typical hydrostatic bearing with lower friction and lower end flow rate at high rotating speed.Keywords
Funding Information
- Ministry of Science and Technology of the People's Republic of China (MOST 107-2218-E-007-006)
This publication has 29 references indexed in Scilit:
- Dynamic Characteristics of Hydrostatic Active Journal Bearing of Four Oil RecessesTribology Transactions, 2014
- A Three-Dimensional Parametric Study and Numerical/Experimental Flow Visualization of a Six-Pocket Hydrostatic Journal BearingTribology Transactions, 2013
- Analytical solution for two‐dimensional Reynolds equation for porous journal bearingsIndustrial Lubrication and Tribology, 2006
- Comparative study of the performance of six-pocket and four-pocket hydrostatic/hybrid flexible journal bearingsTribology International, 1995
- Effects of the Feedline and the Hydrostatic Pocket Depth on the Flow Pattern and Pressure DistributionJournal of Tribology, 1995
- Investigation of recessed hydrostatic and slot-entry journal bearings for hybrid hydrodynamic and hydrostatic operationWear, 1977
- Dynamic force coefficients and the mechanism of instability in hydrostatic journal bearingsWear, 1973
- An exact analysis of a hydrostatic journal bearing with a large circumferential sillWear, 1972
- Lubrication of Porous Journal BearingsJournal of Lubrication Technology, 1972
- Design of hydrostatic bearings using an operating parameterWear, 1969