Nanostructured Li2S Cathodes for Silicon–Sulfur Batteries
Authors:
- Hamid MollaniaHMHamid Mollania
- Chaoqi ZhangChaoqi Zhang
- Ruifeng DuRDRuifeng Du
- Xueqiang QiXueqiang Qi
- Junshan LiJunshan Li
- Sharona HortaSHSharona Horta
- Maria IbañezMaria Ibañez
- Caroline KellerCKCaroline Keller
- Pascale ChenevierPCPascale Chenevier
- Majid Oloomi-BuygiMOMajid Oloomi-Buygi
- Andreu CabotACAndreu Cabot
- 5 December 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (50) , 58462-58475
Abstract
Lithium-sulfur batteries are regarded as an advantageous option for meeting the growing demand for high-energy-density storage, but their commercialization relies on solving the current limitations of both sulfur cathodes and lithium metal anodes. In this scenario, the implementation of lithium sulfide (Li2S) cathodes compatible with alternative anode materials such as silicon has the potential to alleviate the safety concerns associated with lithium metal. In this direction, here, we report a sulfur cathode based on Li2S nanocrystals grown on a catalytic host consisting of CoFeP nanoparticles supported on tubular carbon nitride. Nanosized Li2S is incorporated into the host by a scalable liquid infiltration-evaporation method. Theoretical calculations and experimental results demonstrate that the CoFeP-CN composite can boost the polysulfide adsorption/conversion reaction kinetics and strongly reduce the initial overpotential activation barrier by stretching the Li-S bonds of Li2S. Besides, the ultrasmall size of the Li2S particles in the Li2S-CoFeP-CN composite cathode facilitates the initial activation. Overall, the Li2S-CoFeP-CN electrodes exhibit a low activation barrier of 2.56 V, a high initial capacity of 991 mA h gLi2S-1, and outstanding cyclability with a small fading rate of 0.029% per cycle over 800 cycles. Moreover, Si/Li2S full cells are assembled using the nanostructured Li2S-CoFeP-CN cathode and a prelithiated anode based on graphite-supported silicon nanowires. These Si/Li2S cells demonstrate high initial discharge capacities above 900 mA h gLi2S-1 and good cyclability with a capacity fading rate of 0.28% per cycle over 150 cycles.Keywords
Funding Information
- Agence Nationale de la Recherche (ANR-22-MIN3-0003-01)
- European Commission
- Natural Science Foundation of Sichuan Province (2022NSFSC1229)
- Generalitat de Catalunya (2021 SGR 01581)
- Agencia Estatal de Investigaci?n,Ministerio de Ciencia, Innovaci?n y Universidades (PCI2022-132985/AEI/10.13039/501100011033)
This publication has 70 references indexed in Scilit:
- PVP-Assisted Synthesis of Uniform Carbon Coated Li2S/CB for High-Performance Lithium–Sulfur BatteriesACS Applied Materials & Interfaces, 2015
- One-pot pyrolysis of lithium sulfate and graphene nanoplatelet aggregates: in situ formed Li 2 S/graphene composite for lithium–sulfur batteriesNanoscale, 2015
- Recent Advances in Lithium Sulfide Cathode Materials and Their Use in Lithium Sulfur BatteriesAdvanced Energy Materials, 2015
- In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion BatteriesACS Nano, 2013
- Synthesis and characterization of graphitic carbon nitride sub-microspheres using microwave method under mild conditionDiamond and Related Materials, 2013
- High-Capacity Micrometer-Sized Li2S Particles as Cathode Materials for Advanced Rechargeable Lithium-Ion BatteriesJournal of the American Chemical Society, 2012
- Oxygen Bridges between NiO Nanosheets and Graphene for Improvement of Lithium StorageACS Nano, 2012
- Capillary condensation of adsorbates in porous materialsAdvances in Colloid and Interface Science, 2011
- Determination of Nanocrystal Sizes: A Comparison of TEM, SAXS, and XRD Studies of Highly Monodisperse CoPt3 ParticlesLangmuir, 2005
- Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984)Pure and Applied Chemistry, 1985