Enhancing the Fracture Toughness Properties by Introducing Anchored Nano-Architectures at the Metal–FRP Composite Interface
Open Access
- 13 February 2019
- journal article
- research article
- Published by MDPI AG in Journal of Composites Science
- Vol. 3 (1) , 17
Abstract
This paper presents a novel technique for improving aluminium–glass/epoxy composite interfacial bonding through the generation of metallic nano-architectures on the metal surface. Silver nanowires (AgNWs) deposited via solution casting at varying concentrations and annealed at different temperatures in an air atmosphere improved the aluminium-glass/epoxy composite fracture toughness as measured via mode I experiments. For AgNW concentrations of 1 and 3 g/m2 deposited via a single-stage process and annealed at 375 °C, the initiation fracture toughness of the aluminium-glass/epoxy composite improved by 86% and 157%, respectively, relative to the baseline composite without AgNWs. The corresponding steady-state fracture toughness of these nano-modified fibre metal laminates (FMLs) were at least seven times greater than the baseline composite. The FML variant in which AgNWs were deposited at a concentration of 3 g/m2 through a two-stage process followed by annealing at 375 °C and 300 °C, respectively after each deposition, achieved the highest steady-state fracture toughness of all nano-modified composites—a fracture toughness value that was 13 times greater than the baseline composite. Intrinsic and extrinsic toughening mechanisms dictated by the morphology of the silver nano-architectures were found to be responsible for the improved initiation and steady-state fracture toughness in nano-modified FMLs.Keywords
This publication has 40 references indexed in Scilit:
- Recent advances in the development of aerospace materialsProgress in Aerospace Sciences, 2018
- Interface analysis of fiber metal laminatesComposite Interfaces, 2013
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011
- Wettability improving of 2024 aluminium alloy by oxygen cold plasma treatmentThe International Journal of Advanced Manufacturing Technology, 2006
- The mechanical behavior of GLARE laminates for aircraft structuresJOM, 2005
- Delamination buckling of fibre–metal laminatesComposites Science and Technology, 2001
- Development of fibre metal laminates for advanced aerospace structuresJournal of Materials Processing Technology, 2000
- Plasma Spray Coatings as Treatments for Aluminum, Titanium and Steel AdherendsSurface and Interface Analysis, 1997
- Fiber metal laminates: An advanced material for future aircraftJournal of Materials Processing Technology, 1997
- Application of modern aluminum alloys to aircraftProgress in Aerospace Sciences, 1996