Optimization research to minimize fuel consumption/ NOx emission of a two-stroke low speed marine diesel engine
Authors:
- 15 April 2025
- journal article
- Published by SAGE Publications in International Journal of Engine Research
- Vol. 26 (11) , 1726-1741
Abstract
This paper has proposed a single objective optimization approach using particle swarm optimization (PSO) algorithm to minimize fuel consumption (CO 2 emission) or NOx emissions. The proposed optimization approach is conducted based on a zero-dimensional engine model, which is validated with engine experiment data. The compression ratio (CR), start of injection timing (SOI) and exhaust valve closing timing (EC) are selected as optimization variables based on single-parameter sensitivity analysis, as they have significant impact on engine specific fuel oil consumption (SFOC) and NOx emissions. A diesel engine performance optimization program is established, with the minimum SFOC or NOx emissions as the optimization objective, respectively. During the optimization process, constraints on the maximum combustion pressure (P max ) and the maximum pressure rise rate are considered. A two-stroke diesel engine MAN’s 7G80ME-C is used for case analysis. The optimization results show that a maximum fuel reduction of 2.26% can be achieved at 100% load when SFOC is selected as objective. On the other hand, NOx emissions can be reduced up to 24.61% when minimizing NOx is selected as the objective.Keywords
This publication has 59 references indexed in Scilit:
- Insights into the influence of n‐butanol with neat biodiesel and biodiesel‐diesel blends on diesel engine characteristics: ReviewInternational Journal of Energy Research, 2021
- Numerical and thermodynamic study on effects of high and low pressure exhaust gas recirculation on turbocharged marine low-speed engineApplied Energy, 2020
- Numerical study on NOx and ISFC co-optimization for a low-speed two-stroke engine via Miller cycle, EGR, intake air humidification, and injection strategy implementationApplied Thermal Engineering, 2019
- A 0D model for diesel engine simulation and employing a transcritical dual loop Organic Rankine Cycle (ORC) for waste heat recovery from its exhaust and coolant: Thermodynamic and economic analysisApplied Thermal Engineering, 2019
- Multi-objective online optimization of a marine diesel engine using NSGA-II coupled with enhancing trained support vector machineApplied Thermal Engineering, 2018
- Development of a real-time two-stroke marine diesel engine model with in-cylinder pressure prediction capabilityApplied Energy, 2017
- Development of a combined mean value–zero dimensional model and application for a large marine four-stroke Diesel engine simulationApplied Energy, 2015
- Validation of a zero-dimensional model for prediction of NOx and engine performance for electronically controlled marine two-stroke diesel enginesApplied Thermal Engineering, 2012
- A complete 0D thermodynamic predictive model for direct injection diesel enginesApplied Energy, 2011
- Rare earths based oxides as alternative materials to Ba in NOx-trap catalystsTopics in Catalysis, 2007