Hot-wire Laser Welding Process Using Laser Diode for Large-Diameter Pipe with Narrow Gap Joint
Authors:
Open Access
- 1 January 2015
- journal article
- Published by Japan Welding Society in QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
- Vol. 33 (2) , 107s-110s
Abstract
We investigated a hot-wire laser welding method using a laser diode with a rectangular laser beam to weld a large-diameter pipe with a narrow gap. First, welding trials using plate specimens were performed to obtain the optimum welding conditions using a defocused beam. We achieved stable feeding of wire, a stable molten pool, and a well-formed weld bead, with few defects. Second, we welded a large-diameter pipe using optimum welding conditions discovered from the trials. Although some small lack of fusion occurrences were observed in the side bending test, we achieved a narrow gap, low dilution, narrow heat-affected zone weld without solidification cracks.Keywords
This publication has 4 references indexed in Scilit:
- Fundamental Study of Narrow Gap Welding with Oscillation Laser BeamQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2014
- High-Power and High-Brightness Laser Butt Welding with Using Hot Wire for Thick High-Strength Steel PlateQUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY, 2011
- Laser narrow gap welding of thick carbon steels using high brightness laser with beam oscillation2011
- Experimental test set-up for studying hot cracking in multi pass laser hybrid welding of thick section austenitic stainless steel2008