Developing Barbed Microtip-Based Electrode Arrays for Biopotential Measurement
Open Access
- 10 July 2014
- Vol. 14 (7) , 12370-12386
Abstract
This study involved fabricating barbed microtip-based electrode arrays by using silicon wet etching. KOH anisotropic wet etching was employed to form a standard pyramidal microtip array and HF/HNO3 isotropic etching was used to fabricate barbs on these microtips. To improve the electrical conductance between the tip array on the front side of the wafer and the electrical contact on the back side, a through-silicon via was created during the wet etching process. The experimental results show that the forces required to detach the barbed microtip arrays from human skin, a polydimethylsiloxane (PDMS) polymer, and a polyvinylchloride (PVC) film were larger compared with those required to detach microtip arrays that lacked barbs. The impedances of the skin-electrode interface were measured and the performance levels of the proposed dry electrode were characterized. Electrode prototypes that employed the proposed tip arrays were implemented. Electroencephalogram (EEG) and electrocardiography (ECG) recordings using these electrode prototypes were also demonstrated.Keywords
This publication has 37 references indexed in Scilit:
- A Low-Power Bio-Potential Acquisition System with Flexible PDMS Dry Electrodes for Portable Ubiquitous Healthcare ApplicationsSensors, 2013
- Textile Electrodes for EEG Recording — A Pilot StudySensors, 2012
- Microneedle-based electrodes with integrated through-silicon via for biopotential recordingSensors and Actuators A: Physical, 2012
- Biosensor Technologies for Augmented Brain–Computer Interfaces in the Next DecadesProceedings of the IEEE, 2012
- Novel Dry Polymer Foam Electrodes for Long-Term EEG MeasurementIEEE Transactions on Biomedical Engineering, 2010
- A Power-Efficient Bio-Potential Acquisition Device with DS-MDE Sensors for Long-Term Healthcare Monitoring ApplicationsSensors, 2010
- First human trials of a dry electrophysiology sensor using a carbon nanotube array interfaceSensors and Actuators A: Physical, 2008
- EEG alpha and theta oscillations reflect cognitive and memory performance: a review and analysisBrain Research Reviews, 1999
- The Use of Surface Electromyography in BiomechanicsJournal of Applied Biomechanics, 1997
- Prognostic significance of the signal-averaged ECG depends on the time of recording in the postinfarction periodAmerican Heart Journal, 1989