Variability resilient low-power 7T-SRAM design for nano-scaled technologies
- 1 March 2010
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19483287,p. 9-14
Abstract
High variability in nano-scaled technologies can easily disturb the stability of a carefully designed standard 6T-SRAM cell, causing access failures during a read/write operation. We propose a 7T-SRAM cell to increase the read/write stability under large variations. The proposed design uses a low overhead read/write assist circuitry to increase the noise immunity. Use of an additional transistor and a floating ground allows read disturb free operation. While the write assist circuitry provides a floating ground during a write operation that weakens cell storage by turning off the supply voltage to ground path of the cross-coupled inverter pair. This allows a high speed/low power write operation. Monte Carlo simulations indicate a 200% increase in the read stability and a boost of 124% in write stability compared to a conventional 6T-SRAM design, when subjected to random dopant fluctuations, line edge roughness, and poly-granularity variations. HSPICE simulations of a 45nm 64×32 bit SRAM array designed using standard 6T and proposed 7T SRAM cells indicate a 31% improvement in write speed/write power, read power decreases by 60%, and a 44% reduction in the total average power consumption is achieved with the proposed design.Keywords
This publication has 7 references indexed in Scilit:
- Impact of strain on the performance of high-k/metal replacement gate MOSFETs2009
- An 8T-SRAM for Variability Tolerance and Low-Voltage Operation in High-Performance CachesIEEE Journal of Solid-State Circuits, 2008
- A single ended 6T SRAM cell design for ultra-low-voltage applicationsIEICE Electronics Express, 2008
- Poly-Si-Gate-Related Variability in Decananometer MOSFETs With Conventional ArchitectureIEEE Transactions on Electron Devices, 2007
- Impact of Random Dopant Fluctuation on Bulk CMOS 6-T SRAM Scaling2006 European Solid-State Device Research Conference, 2006
- A Read-Static-Noise-Margin-Free SRAM Cell for Low-VDD and High-Speed ApplicationsIEEE Journal of Solid-State Circuits, 2005
- Driving source-line cell architecture for sub-1-V high-speed low-power applicationsIEEE Journal of Solid-State Circuits, 1996