Effects of adhesive systems and luting agents on bonding of fiber posts to root canal dentin
- 21 October 2005
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Vol. 77B (1) , 195-200
Abstract
The study evaluated the influence of different luting materials on the microtensile bond strength of glass fiber posts to root canal dentin. Thirty extracted maxillary premolars were endodontically treated, and the roots were prepared for post cementation using the FRC Postec system (Vivadent). Two luting materials (Multilink, Vivadent and Clearfil Photo Core, Kuraray) were used in combination with three adhesive: Multilink Primer (Vivadent), Clearfil Photo Bond, and Clearfil New Bond (Kuraray). A composite build‐up was performed around the root to provide adequate gripping during testing. Specimens were cut to obtain beams with the post in the center and with the radicular dentin overlaid by the composite build‐up on each side. Microtensile testing was performed with a universal testing machine at a cross‐head speed of 0.5 mm/min. The failure mode was classified under a stereomicroscope and four representative beams of each group were selected for SEM analysis. Bond strength data that were analyzed with two‐way ANOVA and Student‐Newman‐Keuls multiple comparisons tests revealed that adhesive systems, luting materials, and the interaction between these two factors significantly influenced the bond strength results (p < 0.01). Multilink applied with its own adhesive system obtained the best results, while the lowest bond strength was achieved with clearfil photo core in combination with multilink primer. © 2005 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2006Keywords
This publication has 27 references indexed in Scilit:
- Adhesion to root canal dentine using one and two‐step adhesives with dual‐cure composite core materialsJournal of Oral Rehabilitation, 2005
- Water movement in the hybrid layer after different dentin treatmentsDental Materials, 2004
- Fluid Movement across the Resin-Dentin Interface during and after BondingJournal of Dental Research, 2004
- Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidenceJournal of Dentistry, 2004
- Translucent fiber post cementation using a light-curing adhesive/composite system: SEM analysis and pull-out testJournal of Dentistry, 2004
- Microtensile bond strength of a dual-cure resin core material to glass and quartz fibre postsJournal of Dentistry, 2004
- The adhesion between fiber posts and root canal walls: comparison between microtensile and push‐out bond strength measurementsEuropean Journal of Oral Sciences, 2004
- Variability in Microleakage Observed in a Total-etch Wet-bonding Technique under Different Handling ConditionsJournal of Dental Research, 1995
- Comparative study of four glass ionomer luting cements during post pull-out testsDental Materials, 1994
- Setting Stress in Composite Resin in Relation to Configuration of the RestorationJournal of Dental Research, 1987