Large aperture vibrating wire monitor with two mechanically coupled wires for beam halo measurements
Authors:
- S. G. ArutunianSAS. G. Arutunian
- A. E. AvetisyanAAA. E. Avetisyan
- M. M. DavtyanMDM. M. Davtyan
- G. S. HarutyunyanGHG. S. Harutyunyan
- I. E. VasiniukIVI. E. Vasiniuk
- M. ChungMCM. Chung
- V. ScarpineVSV. Scarpine
Open Access
- 19 March 2014
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review Special Topics - Accelerators and Beams
- Vol. 17 (3)
Abstract
Development of a new type of vibrating wire monitor (VWM), which has two mechanically coupled wires (vibrating and target), is presented. The new monitor has a much larger aperture size than the previous model of the VWM, and thus allows us to measure transverse beam halos more effectively. A prototype of such a large aperture VWM with a target wire length of 60 mm was designed, manufactured, and bench-tested. Initial beam measurements have been performed at the Fermilab High Intensity Neutrino Source facility, and key results are presented.Keywords
This publication has 4 references indexed in Scilit:
- Beam halo imaging with a digital optical maskPhysical Review Special Topics - Accelerators and Beams, 2012
- Flexible core masking technique for beam halo measurements with high dynamic rangeJournal of Instrumentation, 2010
- Vibrating wire scanner: First experimental results on the injector beam of the Yerevan synchrotronPhysical Review Special Topics - Accelerators and Beams, 2003
- Vibrating wire for beam profile scanningPhysical Review Special Topics - Accelerators and Beams, 1999