Tests on timber frame walls under in-plane forces: part 1
Authors:
- 1 November 2015
- journal article
- research article
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 168 (11) , 826-839
Abstract
The mechanical behaviour of timber frame shear walls subjected to in-plane forces has been investigated through full-scale tests. Eleven monotonic and 11 cyclic tests were performed on full-scale shear walls, each 2·5 m high by 2·5 m long. Some variables were changed during the tests as follows; different vertical loads were applied, various angle brackets and hold-downs were used, and different sheathing panels were connected to the timber frame. Also, the influence of openings was investigated. Furthermore two walls with non-structural finishing were tested in order to correlate the inter-storey drift with the level of damage. In part 1 of the paper, the test procedure and test results are presented. A detailed discussion of the test apparatus and how the boundary conditions influence the results are also reported. The theoretical approach used to predict the mechanical behaviour of the presented system is explained.Keywords
This publication has 7 references indexed in Scilit:
- Tests on timber frame walls under in-plane forces: part 2Proceedings of the Institution of Civil Engineers - Structures and Buildings, 2015
- Experimental investigation on sheathing-to-framing connections in wood shear wallsEngineering Structures, 2013
- Mechanical behaviour of connections between wood framed shear walls and foundations under monotonic and cyclic loadConstruction and Building Materials, 2013
- Behavior of dowel-type timber connections under cyclic loading2013
- Seismic design of CLT Buildings: Definition of the suitable q-factor by numerical and experimental procedures2013
- Ductility of timber joints under static and cyclic loadsProceedings of the Institution of Civil Engineers - Structures and Buildings, 2011
- Evolution of Wood Shear Wall Testing, Modeling, and Reliability Analysis: BibliographyPractice Periodical on Structural Design and Construction, 2004