Co-integration of InGaAs n- and SiGe p-MOSFETs into digital CMOS circuits using hybrid dual-channel ETXOI substrates
Authors:
- 1 December 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 01631918,p. 2.8.1-2.8.4
Abstract
We demonstrate for the first time a dense co-integration of co-planar nano-scaled SiGe p-FETs and InGaAs n-FETs. This result is based on hybrid substrates containing extremely-thin SiGe and InGaAs layers on insulators (ETXOI). We first show that such hybrid substrates can be fabricated by direct wafer bonding with stacked high-mobility layers thinner than 8nm. A process flow is presented that allows us to fabricate n- and p-channel field effect transistors with ultra-thin body and BOX (UTBB-FET) on the same wafer. Gate lengths down to 40nm produced at sub-μm gate-pitch are achieved. Working CMOS inverters are obtained using a common front-end which confirms the viability of this integration scheme for hybrid high-mobility dual-channel CMOS. We also highlight that back-biasing technique for V t tuning can still be used despite the dualchannel structure, as implemented in standard ETSOI circuits.Keywords
This publication has 4 references indexed in Scilit:
- Scalability of ultra-thin-body and BOX InGaAs MOSFETs on silicon2013
- An integration path for gate-first UTB III-V-on-insulator MOSFETs with silicon, using direct wafer bonding and donor wafer recycling2012
- High performance extremely thin SOI (ETSOI) hybrid CMOS with Si channel NFET and strained SiGe channel PFET2012
- Electrostatics improvement in 3-D tri-gate over ultra-thin body planar InGaAs quantum well field effect transistors with high-K gate dielectric and scaled gate-to-drain/gate-to-source separation2011