Mechanical Stress-Induced Defects in Thick a-PbO Layers
Open Access
Abstract
Amorphous lead oxide (a-PbO) X-ray photoconductors show potential for applications in direct conversion medical imaging detectors within the diagnostic energy range. a-PbO enables large-area deposition at low temperatures and exhibits no signal lag. Low dark current can be maintained through specialized blocking layers, similar to those used in multilayer amorphous selenium (a-Se) structures in commercial detectors. However, the current state of a-PbO technology faces challenges in thick layer deposition, leading to crystalline inclusions and cracks. Our proposed stress-induced crystallization model reveals that intrinsic stress in a-PbO layers amplifies with thickness, leading to crystallographic defects. These defects, which are associated with the stable phase of β-PbO, contribute to increased dark current and initiate layer cracking. We calculate the thermal expansion coefficient of a-PbO, indicating a thermomechanical mismatch between the photoconductor and the substrate as the primary source of stress. Furthermore, we demonstrate that layer deposition parameters significantly impact heat accumulation within the growing layer, thereby facilitating temperature-induced crystallization. Our study suggests that relieving stress in grown a-PbO layers by eliminating thermal expansion coefficient mismatches between different layers in a-PbO blocking structures, coupled with optimizing deposition parameters to prevent heat accumulation during layer growth, may inhibit or even prevent stress-induced crystallization and the emergence of structural defects in thick a-PbO layers.Keywords
Funding Information
- Mitacs (IT30395, 2018-00015, TKP2021-NKTA-42)
- Ontario Research Fund: Research Excellence, Terry Fox Foundation, and Research Institute, Ontario Institute for Cancer Research, Canadian Research Chairs (IT30395, 2018-00015, TKP2021-NKTA-42)
- National Research, Development, and Innovation Fund of the Ministry for Innovation and Technology, Hungary (IT30395, 2018-00015, TKP2021-NKTA-42)
This publication has 29 references indexed in Scilit:
- Metal Halide Perovskites for Direct X‐Ray Detection in Medical Imaging: To Higher PerformanceAdvanced Functional Materials, 2024
- High signal-to-noise ratio HgI X-ray detector assisted with ultraviolet radiationNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2019
- Electrical, structural and optical properties of Cd1-Zn Te thick polycrystalline filmsVacuum, 2018
- Laser-induced surface recrystallization of polycrystalline PbI2 thick films for X-ray detector applicationApplied Surface Science, 2018
- Coefficient of thermal expansion of nanostructured tungsten based coatings assessed by substrate curvature methodMaterials & Design, 2018
- Ion-assisted deposition of amorphous PbO layersJournal of Materials Science, 2017
- Polycrystalline lead iodide films produced by solution evaporation and tested in the mammography X-ray energy rangeJournal of Physics and Chemistry of Solids, 2016
- Amorphous selenium and its alloys from early xeroradiography to high resolution X‐ray image detectors and ultrasensitive imaging tubesPhysica Status Solidi (b), 2009
- Celebrating the 100th anniversary of the Stoney equation for film stress: Developments from polycrystalline steel strips to single crystal silicon wafersThin Solid Films, 2009
- Amorphous selenium as an X-ray photoconductorJournal of Non-Crystalline Solids, 2004