Expansion During Liquid Phase Sintering of Iron–Copper Compacts
Authors:
- Yoshimoto WanibeYWYoshimoto Wanibe
- Hiroyasu YokoyamaHYHiroyasu Yokoyama
- Takashi ItohTITakashi Itoh
- 1 January 1990
- journal article
- Published by SAGE Publications in Powder Metallurgy
- Vol. 33 (1) , 65-69
Abstract
An attempt has been made to develop a quantitative approach to the swelling during isothermal liquid phase sintering of Fe–Cu compacts. The time dependent expansion was followed during sintering at 1150°C by measuring anisotropic changes in dimensions using photography and micrometry. Cylindrical compacts containing up to 20%Cu, pressed at 200, 250, and 300 MPa, were examined. Differences were observed in the extent of swelling, sintering behaviour, and sintered structure between compacts containing ≤5%Cu and ≥10%Cu; these differences can be reasonably attributed to differences in the quantity of the fused melt. The extent of swelling can be assessed satisfactorily on the basis of the bulk density of green compacts, which reflects both powder characteristics and compaction conditions. Such an assessment enables quantitative comparison of results obtained under different sintering conditions. PM/0501Keywords
This publication has 8 references indexed in Scilit:
- Quantitative Analysis of Anisotropic Shrinkage During Sintering of Cylindrical Nickel and Iron CompactsPowder Metallurgy, 1989
- Anisotropic Shrinkage and Thermal Expansion During Sintering of Cylindrical Nickel and Iron CompactsPowder Metallurgy, 1989
- Mechanical properties of sintered Fe-Cu alloys prepared with plated powder.Journal of the Japan Society of Powder and Powder Metallurgy, 1986
- Figure of Merit for Activated SinteringPowder Metallurgy, 1985
- Present State of Liquid Phase SinteringPowder Metallurgy, 1985
- Investigation and Analysis of Liquid Phase Sintering of Fe—Cu and Fe–Cu–C CompactsPowder Metallurgy, 1985
- Dimensional Changes During Liquid Phase Sintering of Fe–Cu CompactsPowder Metallurgy, 1984
- Effect of Graphite Addition on the Abnormal Expansion of Mixed Powder Compacts of the Fe-Cu Binary System During SinteringJournal of the Japan Institute of Metals and Materials, 1976