Interfacial adhesion through maleic anhydride grafting of EPDM in PP/EPDM blend
- 28 September 2006
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 102 (6) , 5528-5532
Abstract
This paper presents a study of interface modification effect through the use of maleic anhydride (MAH) grafting on one of the component polymers of the binary blend. The system used is binary blend of polypropylene (PP) and the elastomer EPDM (copolymer of ethylene–propylene–diene monomer). Two sets of the blend (i) PP/EPDM binary blend and (ii) PP/EPDM‐g‐MAH binary blend at constant degree of grafting (i.e., EPDM : MAH ratio) and at varying blending ratios were studied and compared for the properties and structure development. Results are discussed to illustrate the effect of interfacial modification due to presence of MAH by comparing the data of mechanical properties and crystallization behavior for the two sets of the binary blend at identical blending ratios, as well as to study the trends of variation of properties with blending ratio for each individual set of the blend. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5528–5532, 2006Keywords
This publication has 19 references indexed in Scilit:
- Toughening of PP/EPDM blend by compatibilizationJournal of Applied Polymer Science, 2000
- Dynamic mechanical properties of polypropylene-g-maleic anhydride and ethylene-propylene-diene terpolymer blends: Effect of blend preparation methodsJournal of Applied Polymer Science, 2000
- Fracture toughness investigation of the dynamically vulcanized EPDM/PP/ionomer ternary blends using the J-integral via the locus methodJournal of Materials Science, 1996
- The control of miscibility of PP/EPDM blends by adding lonomers and applying dynamic vulcanizationPolymer Engineering & Science, 1995
- Rheological properties, tensile properties, and morphology of PP/EPDM/lonomer ternary blendsJournal of Applied Polymer Science, 1994
- Fracture mechanics investigation on the PP/EPDM/ionomer ternary blends using j‐integral by locus methodJournal of Applied Polymer Science, 1994
- Tensile properties and morphology of the dynamically cured EPDM and PP/HDPE ternary blendsJournal of Applied Polymer Science, 1989
- Morphology and properties of blends of polypropylene with ethylene‐propylene rubberPolymer Engineering & Science, 1984
- Polypropylene based polymer blends: Fields of application and new trendsPolymer Engineering & Science, 1984
- Toughened Plastics1977