Numerical study on fatigue failure mechanism of reinforced concrete slabs under coupled action of corrosion and cyclic loading
Open Access
- 26 January 2026
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 3496
Abstract
Based on three-dimensional scanning technology, a database of real block stone shapes with varying particle sizes was established, and discrete element models of reinforced concrete with different corrosion rates were developed, accounting for the particle crushing effect. Four-point bending fatigue numerical simulations were conducted on reinforced concrete models with corrosion rates of 0%, 10%, 25%, and 40% to investigate their mechanical characteristics, failure modes, damage evolution, force chain distribution, and energy dissipation. The aim was to reveal the influence mechanism of corrosion on the fatigue performance of reinforced concrete.The results show that for uncorroded specimens, the stiffness ratio decreases gradually, with a residual stiffness of 60%. At a corrosion rate of 40%, the stiffness ratio exhibits a cliff-like drop, leaving only 30% residual stiffness. Deflection growth is markedly accelerated, and the deformation capacity of the structure deteriorates significantly. In terms of failure mode, corrosion causes a gradual transition from ductile bending failure to brittle shear failure. This shift indicates a substantial reduction in both load-bearing capacity and structural safety margin. Damage process analysis reveals that acoustic emission intensity progresses through three stages: micro-crack initiation, stable crack propagation, and rapid crack expansion leading to structural instability. Corrosion accelerates both the initiation and propagation of micro-cracks, causing rapid accumulation and coalescence of internal damage. This process is accompanied by the absorption and release of strain energy, with the peak strain energy of highly corroded specimens decreasing by more than 80%. Regarding force chain distribution, uncorroded specimens have 25% of their force-chains classified as strong, forming an optimal load-transfer path oriented at approximately 45°. As the corrosion rate increases, the proportion of strong force-chains gradually declines.Keywords
Funding Information
- Taizhou University Scientific Research Start-up Fund Project (No.T20250101010)
- 2025 Taizhou Science and Technology Program Project (25nyb10)
This publication has 27 references indexed in Scilit:
- A review on the simulation of aggregate morphologies in mixture performances based on discrete element methodConstruction and Building Materials, 2023
- Analysis of the Fatigue Mechanism of Cement-Stabilized Macadam Mesoscopic Intrinsic Contact Based on the Damage Accumulation–Energy Dissipation MethodIranian Journal of Science and Technology, Transactions of Civil Engineering, 2023
- Numerical simulation of influence of coarse aggregate crushing on mechanical properties of concrete under uniaxial compressionConstruction and Building Materials, 2022
- Fatigue damage numerical simulation of cement-treated base materials by discrete element methodConstruction and Building Materials, 2021
- Simulation of crack growth in reinforced concrete beams using extended finite element methodEngineering Failure Analysis, 2020
- DEM analysis on the role of aggregates on concrete strengthComputers and Geotechnics, 2020
- Corroded reinforced concrete beams under low-speed and low-cycle fatigue loadsConstruction and Building Materials, 2018
- Global and Local Cumulative Damage Models for Reinforced Concrete Structures Subjected to Monotonic, Cyclic, or Fatigue LoadingInternational Journal of Civil Engineering, 2017
- An overview on fatigue damage assessment of reinforced concrete structures with the aid of acoustic emission techniqueConstruction and Building Materials, 2016
- Mechanisms of crack propagation due to corrosion of reinforcement in concrete by AE-SiGMA and BEMConstruction and Building Materials, 2004