Dynamic Compression Mechanical Properties of Polyoxymethylene-Fiber-Reinforced Concrete
Open Access
Abstract
The excellent overall performance of polyoxymethylene (POM) fiber enables it to show great potential for engineering applications. The effect of POM fibers on the dynamic compression mechanical properties of concrete is an important issue for its application in engineering structures such as airport pavement and bridges. It is necessary to investigate the dynamic compressive mechanical properties of POM-fiber-reinforced concrete (PFRC) under impact loading. The PFRC specimens with various POM fiber lengths (6, 8, 12, 16, and 24 mm) and ordinary-performance concrete (OPC) specimens were tested by utilizing the split Hopkinson pressure bar (SHPB). We studied the effect of fiber length and strain rate on the dynamic compression mechanical properties of PFRC and established a damage dynamic constitutive model for PFRC. The results indicate that the dynamic compressive strength, peak strain, ultimate strain, dynamic peak toughness, dynamic ultimate toughness, and dynamic increase factor (DIF) of the PFRC increased obviously with the increase in strain rate. POM fiber was found to be able to effectively improve the deformation ability and impact toughness of concrete. The dynamic compressive strength and impact toughness of PFRC with a fiber length of 8 mm was optimal at different strain rates. The POM fibers with 16 mm and 24 mm lengths negatively affected the dynamic compressive strength of the concrete. The fiber length variation had an insignificant effect on the DIF of PFRC. The established damage dynamic constitutive model for PFRC was fitted and analyzed, and it was found that the model is able to describe the dynamic characteristics of PFRC well. This study can extend POM fibers to engineering structures that may be subjected to impact loading and act as a reference for the design of PFRC under impact loading.Keywords
Funding Information
- National Natural Science Foundation of China (11962009)
This publication has 40 references indexed in Scilit:
- Transient dynamic behavior of polypropylene fiber reinforced mortar under compressive impact loadingConstruction and Building Materials, 2016
- Rate dependent behavior and modeling of concrete based on SHPB experimentsCement and Concrete Composites, 2015
- Dynamic compressive behaviour of spiral steel fibre reinforced concrete in split Hopkinson pressure bar testsConstruction and Building Materials, 2013
- Concrete: treatment of types and properties in fib Model Code 2010Structural Concrete, 2013
- Stress-Strain Behavior and Statistical Continuous Damage Model of Cement Mortar under High Strain RatesJournal of Materials in Civil Engineering, 2013
- Displacement correction for punching at a dynamically loaded bar endInternational Journal of Impact Engineering, 2010
- Modelling of compressive behaviour of concrete-like materials at high strain rateInternational Journal of Solids and Structures, 2008
- Numerical investigation of concrete subjected to compressive impact loading. Part 1: A fundamental explanation for the apparent strength gain at high loading ratesComputers & Structures, 2008
- About the dynamic strength enhancement of concrete-like materials in a split Hopkinson pressure bar testInternational Journal of Solids and Structures, 2003
- Strain-Rate-Dependent Constitutive Equations for ConcreteJournal of Pressure Vessel Technology, 1998