A novel 3D woven carbon fiber composite with super interlayer performance hybridized by CNT tape and copper wire simultaneously
Authors:
Open Access
- 1 January 2023
- journal article
- research article
- Published by Walter de Gruyter GmbH in Science and Engineering of Composite Materials
- Vol. 30 (1)
Abstract
In this work, a novel binary hybrid woven carbon nanotube (CNT) tape/copper wire carbon fiber reinforced epoxy resin composite is prepared. The mode I interlaminar fracture toughness ( G IC ) is employed to critically evaluate the delamination performance. A comparison of the G IC value with that of the carbon fiber reinforced composite confirms that incorporating CNT tapes and copper wires into the composite increases the value by 263%. In the transverse and through-thickness direction, the conductivity of the laminate increases to 458 and 193 S/m, which is increased by 196 and 675%, respectively. The thermal conductivity along the thickness direction is increased to 2.27 W/m K, an increase of 134%. The volume fraction of CNT tapes and copper wire are as low as approximately 0.87 and 0.47 vol%, respectively. 3D woven composites have potential applications in high-performance structures and lightning striking protection such as aircraft, ships, and engines, which benefits by the innovative through-thickness implantation of composites using CNT tape and copper wire.Keywords
This publication has 36 references indexed in Scilit:
- Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepregComposites Part A: Applied Science and Manufacturing, 2015
- Characteristic of mode I fatigue crack propagation of CFRP laminates toughened with CNF interlayerComposites Part B: Engineering, 2014
- Interlaminar toughness characterisation of 3D woven carbon fibre compositesPlastics, Rubber and Composites: Macromolecular Engineering, 2013
- Effect of Carbon Nanofibers on Thermal Conductivity of Carbon Fiber Reinforced CompositesProcedia Engineering, 2013
- Improved interlaminar shear properties of multiscale carbon fiber composites with bucky paper interleaves made from carbon nanofibersCarbon, 2012
- Development of carbon nanofibre incorporated three phase carbon/epoxy composites with enhanced mechanical, electrical and thermal propertiesComposites Part A: Applied Science and Manufacturing, 2011
- An experimental study on mode I and II fracture toughness of laminates stitched with a one-sided stitching techniqueComposites Part A: Applied Science and Manufacturing, 2011
- Multiscale Carbon Nanotube−Carbon Fiber Reinforcement for Advanced Epoxy CompositesLangmuir, 2007
- Dispersion and alignment of carbon nanotubes in polymer matrix: A reviewMaterials Science and Engineering: R: Reports, 2005
- 3D Woven Composites2002