Influence of Electrolyte Hydrodynamics on Current Yield in Ferrate(VI) Production by Anodic Iron Dissolution
- 1 January 2000
- journal article
- Published by Institute of Organic Chemistry & Biochemistry in Collection of Czechoslovak Chemical Communications
- Vol. 65 (1) , 133-140
Abstract
The dependence of current efficiency for ferrate(VI) synthesis on the superimposed electrolyte flow rate was determined using 14 M NaOH solution and a white cast iron electrode. The electrolyte mean velocity in the cell ranged from 0.4 to 2.9 cm s-1 and current density from 1.4 to 35.3 mA cm-2. It was found that current efficiency was influenced by electrolyte velocity only at current densities lower than 7 mA cm-2. This is explained in terms of the removal of intermediate products from the anode surface by the electrolyte convection. This factor becomes negligible at higher current densities in comparison to mass transfer induced by oxygen evolution on the anode surface.Keywords
This publication has 14 references indexed in Scilit:
- Electrochemical production of ferrate(vi) using sinusoidal alternating current superimposed on direct current. Pure iron electrodeJournal of Applied Electrochemistry, 1999
- Electrochemical production of ferrate(VI) using sinusoidal alternating current superimposed on direct current: grey and white cast iron electrodesThis paper is dedicated to the memory of Professor Ivo Roušar.Electrochimica Acta, 1998
- Influence of anode material on current yield during ferrate(vi) production by anodic iron dissolution: Part III: Current efficiency during anodic dissolution of pure iron to ferrate(vi) in concentrated alkali hydroxide solutionsJournal of Applied Electrochemistry, 1997
- Influence of anode material on current yield during ferrate(vi) production by anodic iron dissolution Part II: Current efficiency during anodic dissolution of white cast iron to ferrate(vi) in concentrated alkali hydroxide solutionsJournal of Applied Electrochemistry, 1996
- Influence of anode material on current yields during ferrate(vi) production by anodic iron dissolution Part I: Current efficiency during anodic dissolution of grey cast iron to ferrate(vi) in concentrated alkali hydroxide solutionsJournal of Applied Electrochemistry, 1996
- Current efficiency during anodic dissolution of iron to ferrate(vi) in concentrated alkali hydroxide solutionsJournal of Applied Electrochemistry, 1993
- The study of electrochemical preparation of ferrate(VI) using alternating current superimposed on the direct current. Frequency dependence of current yieldsElectrochimica Acta, 1993
- Bubble behaviour on and mass transfer to an oxygen-evolving transparent nickel electrode in alkaline solutionElectrochimica Acta, 1981
- Elektrochemische Darstellung des Natriumferrats(VI)Collection of Czechoslovak Chemical Communications, 1962
- Über die elektrochemische Bildung eisensaurer AlkalisalzeZeitschrift für Elektrochemie, 1901