Concept of Composite Folded Core Skin Heat Exchanger with Experimental Investigation of Surface Temperatures Using Temperature-Sensitive Paints
Open Access
Abstract
With the increasing integration of low-temperature waste heat systems in aviation, large areas are needed for heat dissipation without causing significant pressure losses. Large-area skin heat exchangers (SHXs) are coming into focus as a possible solution. SHXs based on composite materials offer a promising approach due to their weight-saving potential. This article presents a structure-integrated SHX with a folded core using modern materials and design strategies. An analytical 1D heat transfer model, validated by measurements with temperature-sensitive paints (TSPs), was derived to efficiently identify the optimal parameter set in the design process of an SHX. The model focuses on transverse heat conduction effects in the facesheet for lateral heat distribution and uses these specifically for the overall mass-optimized configuration of the SHX. It is shown that with an optimally selected distance between the cooling channels in the case considered here, up to 12% more energy can be dissipated in relation to the total mass of the SHX. This article concludes with a sensitivity analysis of the analytical model. The influence of heat transfer, thermal conductivity in two spatial directions, and facesheet thickness on the optimal channel spacing is examined.Keywords
Funding Information
- Aviation Research Programme LuFo of the German Federal Ministry for Economic Affairs and Energy (20E2214)
- Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)—SFB/TRR 364: Synergies of Highly Integrated Transport Aircraft-SynTrac (498601949)
This publication has 17 references indexed in Scilit:
- A study on the potential of skin heat exchangers for hybrid-electric aircraftApplied Thermal Engineering, 2025
- Radiators in fuel cell powered aircraft: the effect of heat rejection on dragApplied Thermal Engineering, 2025
- Thermal management challenges in hybrid-electric propulsion aircraftProgress in Aerospace Sciences, 2023
- Anisotropic thermal and electrical conductivities of individual polyacrylonitrile-based carbon fibersCarbon, 2022
- Pressure and Temperature Sensitive Paints2021
- Electric, hybrid, and turboelectric fixed-wing aircraft: A review of concepts, models, and design approachesProgress in Aerospace Sciences, 2019
- Experimental determination and modeling of thermal conductivity tensor of carbon/epoxy compositeComposites Part A: Applied Science and Manufacturing, 2013
- VDI-Wärmeatlas2013
- Experimental and Numerical Analysis of Composite Folded Sandwich Core Structures Under CompressionApplied Composite Materials, 2007
- The thermal conductivity of carbon fibre-reinforced compositesJournal of Materials Science, 1979