RVE homogenization of fused deposition modeling (FDM) printed parts: From microscale void characterization to elastic property prediction
- 14 October 2026
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Abstract
Inter-raster voids formed during fused deposition modelling (FDM) printing are among the primary microstructural features governing the directional elastic behavior of unidirectional printed parts. In the present work, a measurement-driven representative volume element (RVE) homogenization framework is developed to predict the elastic constants of FDM-printed polylactic acid (PLA) under a 0° raster configuration as a function of two key process parameters: layer height and material flow rate. A full factorial design of experiments (DoE) is conducted, and cross-sectional microscopy images at each design point are analyzed to extract void fraction, void base width, and void height. A curvilinear triangle void model is fitted to the measurements, and response surfaces are calibrated from the DoE points, enabling complete void geometry prediction for new process parameter combinations. The homogenization pipeline is verified against two independent implementations from the literature, with Young's moduli agreeing within 3.7%, shear moduli within 5.3%, and Poisson ratios within 6.2%. The through-thickness modulus E 3 is identified as the dominant process-sensitive constant, ranging from 2176 to 3146 MPa across the design space, governed primarily by layer height, while E 1 remains nearly constant at 3119–3331 MPa. Poisson ratios are found essentially insensitive to process parameters. Framework predictions are validated numerically against RVE homogenization results at four hold-out design points, with deviations within 2.1%. Experimental validation of the three orthotropic Young's moduli is further carried out through tensile tests at the same points, with values consistently below predictions by up to 12.5% across all directions and process conditions.Keywords
This publication has 20 references indexed in Scilit:
- Effect of process parameters on the void fraction and tensile strength of polyvinyl alcohol produced by fused granulate fabricationThe International Journal of Advanced Manufacturing Technology, 2024
- Effects of key process parameters on tensile properties and interlayer bonding behavior of 3D printed PLA using fused filament fabricationProgress in Additive Manufacturing, 2024
- Size effects of voids on the mechanical properties of 3D printed partsThe International Journal of Advanced Manufacturing Technology, 2024
- Prediction and examination of the impact of the raster angle on the orthotropic elastic response of 3D-printed objects using a novel homogenization strategy based on the real clustering of RVEsThe International Journal of Advanced Manufacturing Technology, 2023
- Exploring the Role of Manufacturing Parameters on Microstructure and Mechanical Properties in Fused Deposition Modeling (FDM) Using PETGApplied Composite Materials, 2021
- Mechanical Properties of 3D-Printed Parts Made of Polyethylene Terephthalate GlycolJournal of Materials Engineering and Performance, 2021
- Homogenisation of elastic properties in FDM components using microscale RVE numerical analysisJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2019
- Additive manufacturing (3D printing): A review of materials, methods, applications and challengesComposites Part B: Engineering, 2018
- Development of an ABAQUS plugin tool for periodic RVE homogenisationEngineering with Computers, 2018
- Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theoryMaterials & Design, 2016