Antimony Chalcogenide/Lead Selenide Thin Film Solar Cell with 2.5% Conversion Efficiency Prepared by Chemical Deposition
- 22 January 2013
- journal article
- Published by The Electrochemical Society in ECS Journal of Solid State Science and Technology
- Vol. 2 (4) , Q69-Q73
Abstract
Antimony sulfide-selenide solid solutions offer optical band gaps, Eg, in the 1–1.88 eV interval; and lead selenide offers Eg upward of its bulk value, 0.28 eV, depending on the extent of quantum confinement. In this work, thin film solar cells of SnO2:F/CdS/Sb2(Se/S)3/PbSe/C-Ag are developed by chemical deposition of the thin films on transparent conductive oxide (TCO) glass. To prepare the solar cell, first a CdS thin film of 100 nm in thickness is deposited on the TCO from a solution containing Cd(II)-citrate complex. On this, a thin film is deposited from a solution containing potassium-antimony tartrate, thioacetamide and selenosulfate, which upon heating at 280°C in nitrogen ambient results in a Sb2S1.2Se1.8 film of 150 nm in thickness with an Eg of 1.67 eV. PbSe thin film 110 nm in thickness is deposited on it from a solution of Pb-citrate complex and selenosulfate, with crystalline grain diameter 10 nm, and Eg of 1.86 eV. The cell shows open circuit voltage (Voc), 454 mV, short circuit current density (Jsc) 12.5 mA/cm2, fill factor (FF) 0.44 and conversion efficiency (η) 2.5%. The observed cell parameters are backed by a tentative energy level diagram and an estimate for the light generated current density.Keywords
This publication has 27 references indexed in Scilit:
- Effect of Interfacial Engineering in Solid‐State Nanostructured Sb2S3 Heterojunction Solar CellsAdvanced Energy Materials, 2012
- Towards sustainable photovoltaics: the search for new materialsPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2011
- PbSe Thin Films in All-Chemically Deposited Solar CellsJournal of the Electrochemical Society, 2010
- Antimony Selenide Absorber Thin Films in All-Chemically Deposited Solar CellsJournal of the Electrochemical Society, 2009
- Antimony sulphide thin film as an absorber in chemically deposited solar cellsJournal of Physics D: Applied Physics, 2008
- Photoconductive Antimony Sulfide-Selenide Thin Films Produced by Heating a Chemically Deposited Se–Sb[sub 2]S[sub 3] LayerJournal of the Electrochemical Society, 2006
- Conversion of chemically deposited photosensitive CdS thin films to n-type by air annealing and ion exchange reactionJournal of Applied Physics, 1994
- Studies on new chemically deposited photoconducting antimony trisulphide thin filmsSolar Energy Materials and Solar Cells, 1992
- A new chemical method for preparing semiconductor grade antimony tri-sulphide thin filmsJournal of Physics and Chemistry of Solids, 1990
- Detailed Balance Limit of Efficiency ofp-nJunction Solar CellsJournal of Applied Physics, 1961