High-Strength, High-Toughness Aligned Polymer-Based Nanocomposite Reinforced with Ultralow Weight Fraction of Functionalized Nanocellulose
- 21 August 2018
- journal article
- research article
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 19 (10) , 4075-4083
Abstract
Multifunctional lightweight, flexible, yet strong polymer-based nanocomposites are highly desired for specific applications. However, the control of orientation and dispersion of reinforcing nanoparticles and the optimization of the interfacial interaction still pose substantial challenges in nanocellulose-reinforced polymer composites. In this study, poly(ethylene glycol) (PEG)-grafted cellulose nanofibers have demonstrated much better dispersion in a poly(lactic acid) (PLA) matrix as compared to unmodified nanocellulose. Through a uniaxial drawing method, aligned PLA/nanocellulose nanocomposites with high strength, high toughness, and unique optical behavior can be obtained. With the incorporation of 0.1 wt % of the PEG-grafted cellulose nanofibers in PLA, the ultimate strength of the aligned nanocomposite reaches 343 MPa, which is significantly higher than that of other aligned PLA-based nanocomposites reported previously. Moreover, its ultimate strength and toughness are enhanced by 39% and 70%, respectively, as compared to the aligned nanocomposite reinforced with unmodified cellulose nanofibers. In addition, the aligned nanocomposite film is highly transparent and possesses an anisotropic light scattering effect, revealing its significant potential for optical applications.Keywords
Funding Information
- Kempestiftelserna
- Tekes
- Nordisk Ministerr?d
- Knut och Alice Wallenbergs Stiftelse
- Sveriges Regering
This publication has 71 references indexed in Scilit:
- Transparent and conductive paper from nanocellulose fibersEnergy & Environmental Science, 2012
- Producing low-cost cellulose nanofiber from sludge as new source of raw materialsIndustrial Crops and Products, 2012
- Crystal structure and orientation of uniaxially and biaxially oriented PLA and PP nanoclay composite filmsJournal of Applied Polymer Science, 2011
- Hybrid Rigid/Soft and Biologic/Synthetic Materials: Polymers Grafted onto Cellulose MicrocrystalsBiomacromolecules, 2011
- Wrinkling of a Stretched Thin SheetJournal of Elasticity, 2010
- Entire Surface Oxidation of Various Cellulose Microfibrils by TEMPO-Mediated OxidationBiomacromolecules, 2010
- Alkali Etching of a Poly(lactide) FiberACS Applied Materials & Interfaces, 2009
- Grafting onto microfibrils of native celluloseCellulose, 2008
- Prehydrolyzed Cellulose as Reinforcing Filler for ThermoplasticsInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1987
- Hydrodynamically induced crystallization of polymers from solutionColloid and Polymer Science, 1970