Design and control of a single-stage large air-gapped transformer isolated battery charger for wide-range output voltage for EV applications
- 1 September 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 23293721,p. 5481-5487
Abstract
In this paper, the design procedure for a single stage transformer isolated multi-element resonant converter for an Electric Vehicle (EV) battery charging application with a large air-gap of 8cm and wide-range output voltage is proposed. Instead of having the same resonant frequency on both primary and secondary tank circuits as have been proposed in the literature, different resonant frequencies are used to meet the system specifications. This gives a number of advantages for wide-range output voltage application including simple control and ensures ZVS on the primary side switches and ZCS on the rectifying diodes, which gives high efficiency. A systematic procedure is proposed to design controllers for both current loop and voltage loop to meet the transient performance requirements. To validate the design procedure and controller design, a 1.8 kW system was built and tested. The efficiency was found to be 96.6% for a large air-gap of 8 cm during the constant current mode.Keywords
This publication has 13 references indexed in Scilit:
- Contactless Energy Transfer System With FPGA-Controlled Resonant ConverterIEEE Transactions on Industrial Electronics, 2010
- An Airborne Radar Power Supply With Contactless Transfer of Energy—Part II: Converter DesignIEEE Transactions on Industrial Electronics, 2007
- Design Considerations for a Contactless Electric Vehicle Battery ChargerIEEE Transactions on Industrial Electronics, 2005
- Construction of non-contacting power feeding system to underwater vehicle utilizing electro magnetic induction2005
- Small-signal modeling of series and parallel resonant converters2003
- An electric vehicle charging system with 'universal' inductive interface2002
- Small-signal analysis using harmonic balance methods2002
- Simplified analysis of PWM converters using model of PWM switch. II. Discontinuous conduction modeIEEE Transactions on Aerospace and Electronic Systems, 1990
- Simplified analysis of PWM converters using model of PWM switch. Continuous conduction modeIEEE Transactions on Aerospace and Electronic Systems, 1990
- A general unified approach to modelling switching-converter power stagesInternational Journal of Electronics, 1977