Theoretical analysis of the strength of materials consisting of particles joined along contact areas small in relation to particle size resulted in the model image where p denotes strength, D particle size, γ surface energy, d linear extent of the contact area, E modulus of elasticity for the particles, and θ porosity. The first factor has the same form as the Griffith model except that particle size is substituted for crack size; it shows that strength increases inversely with the square root of particle size. The model can be used as a guide in the design of materials such as mortars with low cement content, sand‐lime bricks, soil stabilizers, and sintered products. The strengths of mortars made from finely ground quartz and cement and cured at high temperatures were 4 to 40 times higher than those of normal mortars with the same cement/water ratio.