Evaluation of Coatings for Mg Alloys for Biomedical Applications
- 25 April 2014
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 17 (1) , 58-67
Abstract
The aim of this work was to assess a number of coatings developed for Mg for biomedical applications. The Mg substrates were high‐purity (HP) Mg and ME10, an alloy recently developed for improved extrudability. The research utilized the new fishing‐line specimen configuration to allow direct comparison to our recent in vivo and in vitro measurements. The in vitro measurements were immersion tests of fishing‐line specimens immersed in Nor's solution at 37 °C. Tests of substantial duration are needed because the corrosion rates of uncoated samples are low. Nor's solution is the designation given to Hank's solution through which CO2 is bubbled at a partial pressure of 0.009 atm. In this solution, pH is maintained constant by the interaction of CO2 and the bicarbonate ions in the solution. This is the same buffer as that which maintains the pH of blood. Coatings examined were: (i) an anodization using a bio‐friendly alkaline electrolyte consisting of phosphate, borate, and metasilicate, (ii) octyltrimethoxysilane (OSi), (iii) 1,2‐bis[triethoxysilyl]ethane (BTSE), (iv) anodization + OSi, and (v) anodization + BTSE. The performance of coated samples was comparable to or better than that of the uncoated samples, and there was a substantially better performance for the ME10 samples after anodization + OSi. Reasons for the various performances are discussed.Keywords
This publication has 68 references indexed in Scilit:
- Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–RE alloys: RE=Ce, La, Nd, Y, GdCorrosion Science, 2013
- Corrosion behaviour in salt spray and in 3.5% NaCl solution saturated with Mg(OH)2 of as-cast and solution heat-treated binary Mg–X alloys: X=Mn, Sn, Ca, Zn, Al, Zr, Si, SrCorrosion Science, 2013
- Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coatingColloids and Surfaces B: Biointerfaces, 2012
- Magnesium alloys for temporary implants in osteosynthesis: In vivo studies of their degradation and interaction with boneActa Biomaterialia, 2012
- Preparation and in vitro degradation of the composite coating with high adhesion strength on biodegradable Mg–Zn–Ca alloyMaterials Characterization, 2011
- Corrosion of high purity Mg, Mg2Zn0.2Mn, ZE41 and AZ91 in Hank’s solution at 37 °CCorrosion Science, 2011
- MAO-DCPD composite coating on Mg alloy for degradable implant applicationsMaterials Letters, 2011
- Understanding Magnesium Corrosion—A Framework for Improved Alloy PerformanceAdvanced Engineering Materials, 2003
- Korrosion von rostfreien St hlen in Chloridl sungen. Eine XPS-Untersuchung der PassivfilmeAnalytical and Bioanalytical Chemistry, 1984
- The Composition of the Surface During Passivation of Stainless SteelsCorrosion, 1982