He-Cooled Divertor Development Towards DEMO
Authors:
- 1 August 2009
- journal article
- research article
- Published by Taylor & Francis in Fusion Science and Technology
- Vol. 56 (2) , 1013-1017
Abstract
A He-cooled divertor concept for DEMO has been pursued at Forschungszentrum Karlsruhe within the framework of the EU power plant conceptual study. The design goal is to achieve a DEMO-relevant heat flux of at least 10 MW/m2. The HEMJ (He-cooled modular divertor with multiple-jet cooling) was chosen as the reference concept. It employs small tiles made of tungsten, which are brazed to a thimble made of tungsten alloy W-1%La2O3. The W finger units are connected to the main structure of ODS Eurofer steel by means of a transition piece. The divertor modules are cooled by helium jets (10 MPa, 600°C) impinging onto the heated surface of the thimble. In cooperation with the Efremov Institute a combined helium loop & electron beam facility (60 kW, 27 keV) was built in St. Petersburg, Russia, for experimental verification of the design. Technological studies were performed on manufacturing of the W finger mock-ups. The results of high heat flux (HHF) tests till now confirm the divertor performance required...Keywords
This publication has 5 references indexed in Scilit:
- Current status of He-cooled divertor development for DEMOFusion Engineering and Design, 2009
- Helium-cooled divertor for DEMO: Manufacture and high heat flux tests of tungsten-based mock-upsJournal of Nuclear Materials, 2009
- Optimization of He-cooled divertor cooling fingers using a CAD-FEM methodFusion Engineering and Design, 2009
- Post-examination of helium-cooled tungsten components exposed to DEMO specific cyclic thermal loadsFusion Engineering and Design, 2009
- He-cooled divertor development for DEMOFusion Engineering and Design, 2007