X‐ray sterilization of biopharmaceutical manufacturing equipment—Extractables profile of a film material and copolyester Tritan™ compared to gamma irradiation
Open Access
- 19 September 2021
- journal article
- research article
- Published by Wiley in Biotechnology Progress
- Vol. 38 (1) , e3214
Abstract
The biopharmaceutical industry gains enormous flexibility in production processes by using sterilized preassembled single‐use devices. Gamma irradiation is an established sterilization technology that may be restricted in the future by the availability of 60 Co as irradiation source and irradiation capacities. X‐ray technology is considered an alternative type of radiation for sterilizing SU equipment. In the context of extractables and leachables—one concern connected with the use of single‐use process equipment—the effect of X‐ray irradiation on the extractables profile of the materials needs to be compared to established gamma irradiation to qualify this alternative technology. An approach is presented to obtain robust and comprehensive extractables data for materials used in SU devices after sterilization either using X‐ray or gamma irradiation. A careful selection of the test items and the test design allows a one‐to‐one comparison of data obtained from a combination of orthogonal analytical techniques. The extractables of a modern SU film material and the copolyester Tritan™ are evaluated. The data presented allow a risk evaluation on the safety of this new sterilization modality for biopharmaceutical applications. It is demonstrated that the extractables profile of a polymer is not affected by the type of irradiation used for sterilization.Keywords
This publication has 30 references indexed in Scilit:
- Single-use disposable technologies for biopharmaceutical manufacturingTrends in Biotechnology, 2013
- Lack of androgenicity and estrogenicity of the three monomers used in Eastman’s Tritan™ copolyestersFood and Chemical Toxicology, 2012
- X-ray versus gamma irradiation effects on polymersRadiation Physics and Chemistry, 2007
- Effects of Gamma Irradiation on Polyethylene, Polypropylene, and Polystyrene2004
- Evaluation of e-beam, 𝛄- and X-ray treatment on the chemistry and safety of polymers used with pre-packaged irradiated foods: a reviewFood Additives & Contaminants, 2001
- Safety evaluation of an ionized multilayer plastic film used for vacuum cooking and meat preservationFood Additives & Contaminants, 1998
- Characterisation of solvent-extractable transformation products of high molecular weight hindered phenols in polypropylene subjected to ionising radiation in air or to thermal ageingPolymer Degradation and Stability, 1993
- Investigation of low mass oligomers and polymer additives from plastics. Part II: Application to polyolefin soxhlet extractsJournal of High Resolution Chromatography, 1991
- Thermal oxidation and its analysis at low levels in polyethyleneMacromolecules, 1984
- Effects of the conditions for electron beam irradiation on the amounts of volatiles from irradiated polyethylene film.Agricultural and Biological Chemistry, 1984