Research on energy, exergy and heat-work conversion of a high-compression-ratio liquid methane spark ignition engine
Authors:
- Shijian ChenSCShijian Chen
- Qi CuiQCQi Cui
- Qiming ZhuQZQiming Zhu
- Le KeLKLe Ke
- Hanyi WangHWHanyi Wang
- Jianqin FuJFJianqin Fu
- Tamer M. M. AbdellatiefTamer M. M. Abdellatief
- Xiongbo DuanXDXiongbo Duan
- Feng ZhouFZFeng Zhou
Preprint
- 23 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Methane can be produced through biogas purification and is a highly promising renewable energy source. To assess the application potential of methane and provide a theoretical basis for optimizing energy conversion efficiency. This study combines experiments and simulations to conduct a numerical study on energy, exergy and heat-work conversion of liquid methane engine (LME) at high compression ratio (CR). Energy analysis reveals that at high speeds and high loads, exhaust energy loss is the main cause of energy dissipation. Exergy analysis shows that at low speeds and low loads, the internal exergy destruction caused by combustion irreversibility accounts for the highest proportion. In terms of operating parameter optimization, the optimal value change trends of energy efficiency and exergy efficiency are nearly consistent. Excessive EGR rate increases heat transfer and incomplete combustion, reducing both energy and exergy efficiencies. When the CA50 is delayed by about 10 °CA, the intake timing is delayed by 5-10 °CA, and the exhaust timing is advanced to about 20 °CA, the energy efficiency and exergy efficiency reach their optimal values, approximately 40.14% and 41.82% respectively. In addition, the study confirms that there is an almost linear quantitative relationship between the effective expansion efficiency (EEE) and the effective expansion ratio (EER). These results clarify the thermodynamic loss mechanisms of LME at high CR and pointed out the direction for the parameter optimization.Keywords
This publication has 42 references indexed in Scilit:
- Biogas regulatory frameworks in Europe: Comparative analysis of biomethane usage in transportEnergy Reports, 2025
- Investigation of high load operation of spark-ignited over-expanded Atkinson cycle engineApplied Energy, 2020
- Comprehensive investigation of injection parameters effect on a turbocharged diesel engine based on detailed exergy analysisApplied Thermal Engineering, 2019
- Effect of Compression Ratio on the Performance and Emission Characteristics, and Cycle-to-Cycle Combustion variations of a Spark-Ignition Engine Fueled with Bio-methane SurrogateApplied Thermal Engineering, 2019
- Experimental and numerical investigation of the effects of combustion chamber reentrant level on combustion characteristics and thermal efficiency of stoichiometric operation natural gas engine with EGRApplied Thermal Engineering, 2017
- Optimal exergy-based control of internal combustion enginesApplied Energy, 2016
- Thermodynamic energy and exergy analysis of three different engine combustion regimesApplied Energy, 2016
- The thermodynamic characteristics of high efficiency, internal-combustion enginesEnergy Conversion and Management, 2012
- Theoretical investigation of heat balance in direct injection (DI) diesel engines for neat diesel fuel and gasoline fumigationEnergy Conversion and Management, 2009
- Chemical exergies of the elementsApplied Energy, 1989