A Water-Powered Micro Drug Delivery System
Authors:
- 3 March 2004
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Microelectromechanical Systems
- Vol. 13 (1) , 75-82
Abstract
A plastic micro drug delivery system has been successfully demonstrated by utilizing the principle of osmosis without any electrical power consumption. The system has an osmotic microactuator (see Su, Lin, and Pisano, J. Microelectromech., vol. 11, pp. 736-7462, Dec. 2002) and a polydimethylsiloxane (PDMS) microfluidic cover compartment consisting of a reservoir, a microfluidic channel and a delivery port. The typical dimension of the microfluidic channel is 1 cm in length with a cross-sectional area of 30/spl times/100 /spl mu/m/sup 2/ to minimize the diffusive drug flow while pressure drop remains moderate. Using oxygen plasma to activate the surfaces of polymers for bonding, the osmotic actuator is bonded with the PDMS cover while liquid drug can be encapsulated during the bonding process. Employing the net water flow induced by osmosis, the prototype drug delivery system has a measured constant delivery rate at 0.2 /spl mu/L/h for 10 h with an accumulated delivery volume of 2 /spl mu/L. Both the delivery rate and volume could be altered by changing the design and process parameters for specific drug delivery applications up to a few years. Moreover, the induced osmotic pressure can be as high as 25 MPa to overcome possible blockages caused by cells or tissues during drug delivery operations.Keywords
This publication has 10 references indexed in Scilit:
- A water-powered osmotic microactuatorJournal of Microelectromechanical Systems, 2002
- Moving smaller in drug discovery and deliveryNature Reviews Drug Discovery, 2002
- Drug Delivery2001
- Controlled drug delivery: therapeutic and pharmacological aspectsJournal of Internal Medicine, 2000
- Osmotic Drug Delivery from Asymmetric Membrane Film-Coated Dosage Forms2000
- Osmotic Implantable Delivery Systems2000
- Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomerJournal of Microelectromechanical Systems, 2000
- Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane)Analytical Chemistry, 1998
- Principles of the design and operation of generic osmotic pumps for the delivery of semisolid or liquid drug formulationsAnnals of Biomedical Engineering, 1976
- Elementary Osmotic PumpJournal of Pharmaceutical Sciences, 1975