Study on Mechanical Properties of AlFeCrMoNi1.8Nb1.5 Eutectic High-Entropy Alloy Coating Prepared by Wide-Band Laser Cladding
Open Access
Abstract
In this study, AlFeCrMoNi1.8Nb1.5 (at.%) eutectic high-entropy alloy (EHEA) coating was successfully prepared on the surface of M2 high-speed steel (HSS) by wide-laser cladding. The effects of laser defocusing amount, laser power, scanning speed, and preset powder thickness on the formation quality of the EHEA coating were studied by the orthogonal experimental design, then the mechanical properties of the coating prepared by water-cooled solidification under optimal process parameters were studied. The experimental results showed that the optimal laser cladding process parameters are defocusing with an amount of −30 mm, laser power of 4 kW, scanning speed of 3 mm/s, and preset powder thickness of 1.5 mm. The substrate exhibited a favorable metallurgical bond with the coating, characterized by a stable interface devoid of any holes or cracks. Furthermore, the coating, which was prepared using water cooling, displayed a finer lamellar eutectic structure comprising FCC and Laves phases. The microhardness of the coating (544 HV0.2) was significantly higher than that of the substrate M2 HSS (~220 HV0.2), accompanied by good wear resistance.Keywords
Funding Information
- Nature Science Foundation of Guizhou Provincial Science and Technology Department ((2020)1Y202, (2019)44, 51965010)
- Talent Introduced of Guizhou University ((2020)1Y202, (2019)44, 51965010)
- National Natural Science Foundation of China ((2020)1Y202, (2019)44, 51965010)
This publication has 43 references indexed in Scilit:
- Fatigue effect of WC coatings thermal sprayed by HVOF and laser treated, on medium carbon steelEngineering Failure Analysis, 2011
- Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloysActa Materialia, 2011
- Grain refinement and boundary misorientation transition by annealing in the laser rapid solidified 6FeNiCoCrAlTiSi multicomponent ferrous alloy coatingSurface and Coatings Technology, 2011
- Microstructure and Properties of CBN Diffusion Coating on High-Speed SteelDefect and Diffusion Forum, 2011
- Thermal Stability and Performance of NbSiTaTiZr High-Entropy Alloy Barrier for Copper MetallizationJournal of the Electrochemical Society, 2011
- Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloysWear, 2010
- Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum contentWear, 2006
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray CoatingAdvanced Engineering Materials, 2004
- The electronegativity parameter for transition metals: Heat of formation and charge transfer in alloysJournal of the Less Common Metals, 1973