Dynamic Stiffness Formulation and Its Application for a Combined Beam and a Two Degree-of-Freedom System
Author:
- 18 June 2003
- journal article
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 125 (3) , 351-358
Abstract
This paper is concerned with the dynamic stiffness formulation and its application for a Bernoulli-Euler beam carrying a two degree-of-freedom spring-mass system. The effect of a two degree-of-freedom system kinematically connected to the beam is represented exactly by replacing it with equivalent stiffness coefficients, which are added to the appropriate stiffness coefficients of the bare beam. Numerical examples whose results are obtained by applying the Wittrick-Williams algorithm to the total dynamic stiffness matrix are given and compared with published results. Applications of the theory include the free vibration analysis of frameworks carrying two degree-of-freedom spring-mass systems.Keywords
This publication has 42 references indexed in Scilit:
- Vibration of a cantilever timoshenko beam with a tip massJournal of Sound and Vibration, 1991
- Free vibration analysis of a uniform cantilever beam with point masses by an analytical-and-numerical-combined methodJournal of Sound and Vibration, 1990
- Vibrations of beams and plates carrying concentrated massesJournal of Sound and Vibration, 1987
- Vibrations of a mass-loaded clamped-free Timoshenko beamJournal of Sound and Vibration, 1987
- A note on the vibrations of restrained beams and rods with point massesJournal of Sound and Vibration, 1984
- Free vibrations of a beam subjected to elastic constraintsJournal of Sound and Vibration, 1978
- Lateral displacements of a vibrating cantilever beam with a concentrated massJournal of Sound and Vibration, 1976
- A note on the vibrations of a clamped-free beam with a mass at the free endJournal of Sound and Vibration, 1974
- Transverse Vibration of an Euler Beam Carrying a System of Heavy BodiesJournal of Applied Mechanics, 1965
- On the Vibration of Beams or Rods Carrying a Concentrated MassJournal of Applied Mechanics, 1963