Rotating Cathode for the Reduction of Nitrobenzene to Hydrazobenzene

Authors:

Abstract
The use of a rotating cathode in the reduction of nitrobenzene suspended in alkaline medium is described. Conditions of electrolysis were similar to those established by Dey and co‐workers except that, using a rotating cathode, the reduction could be carried out at current densities of 15–30 amp/dm2 instead of 2 amp/dm2. Reduction proceeded quite smoothly and an almost quantitative yield of hydrazobenzene was obtained. A rotating mild steel disk cathode with a coating of lead was used along with a cylindrical diaphragm of asbestos cloth supported on a mild steel nickel plated cage as the anode chamber. The best conditions are (i) 10–20% alkali as catholyte and anolyte, (ii) a depolarizer ratio of (w/v) 1:4, (iii) current density of the order of 15–30 amp/dm2, (iv) temperature between 80°–85°C, (v) addition of 1% (w/v) of to the catholyte. Iron substrate is superior to copper or brass as cathode, when deposited with lead. Addition of instead of in the proportions suggested by Sugino and Sekine gave very low yields using rotating cathode. The paper also describes the isolation and recovery of the product and subsequent conversion to benzidine. Cathode potential measurements were also carried out and used to explain some of the results.