Effect of Ti Additions on Micro‐Alloyed Nb TRIP Steel
Authors:
- 24 March 2011
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 82 (7) , 857-865
Abstract
In the present study, the influence of Ti‐additions on the mechanical properties of Nb‐microalloyed TRIP steel is investigated. Ti micro‐alloying additions to multi‐phase Nb TRIP steel result in a substantial increase of the yield strength and a reduction of strain hardening. The increase of the yield strength can be attributed mainly to grain refinement with a relatively small contribution of precipitation hardening. Based on general principles and well‐known models of alloying strengthening, metallurgical reasons for the observed mechanical behavior of the steel can be formulated. The contribution of precipitation hardening is relatively small as Ti‐addition result in the formation of coarse (Nb,Ti)(C,N) particles. The addition of Ti to a Nb‐microalloyed TRIP steel leads to a pronounced enhancement of precipitation kinetics of (Nb,Ti)(C,N), thereby increasing their phase fraction. The precipitates coarsen and tend to form groups of aggregates of particles rather than single isolated particles with increasing intercritical annealing time. In addition, Ti‐addition to Nb‐microalloyed TRIP steel has a direct influence on the chemical composition of the precipitates, which become Ti‐rich.Keywords
This publication has 14 references indexed in Scilit:
- Yielding Behavior of Nb Micro-alloyed C–Mn–Si TRIP Steel Studied by In-situ Synchrotron X-ray DiffractionISIJ International, 2010
- Dissolving behaviour of second phase particles in Nb–Ti microalloyed steelMaterials Letters, 2009
- Microstructure and Mechanical Properties of Microalloyed High-Strength Transformation-Induced Plasticity SteelsMetallurgical and Materials Transactions A, 2007
- Preparation of zirconium pyrophosphate bonded silicon nitride porous ceramicsMaterials Science and Technology, 2006
- A simple relationship between Lüders elongation and work-hardening rate at lower yield stressScripta Materialia, 2006
- Microstructural evolution in a new 770MPa hot rolled Nb–Ti microalloyed steelMaterials Science and Engineering: A, 2005
- Transformation-induced plasticity for high strength formable steelsCurrent Opinion in Solid State and Materials Science, 2004
- Structure–properties relationship in TRIP steels containing carbide-free bainiteCurrent Opinion in Solid State and Materials Science, 2004
- Ultrahigh strength hot rolled microalloyed steels: microstructural aspects of developmentMaterials Science and Technology, 2001
- Effects of Alloying Elements on Mechanical Properties and Phase Transformation of Cold Rolled TRIP Steel Sheets.ISIJ International, 2001