Optimizing the Curing Process of Epoxy-Clay Nanocomposites
Authors:
- 21 February 2011
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 471-472, 415-419
Abstract
Epoxy resin is one of the most applied thermoset polymers as a matrix for Glass Fiber Reinforced Pipes (GFRP). Curing process of epoxy resin is important for the integrity of the GFRP. The present work has been conducted to determine the proper pre-curing and post-curing temperatures and duration to develop epoxy-clay nanocomposite. During this study a differential scanning calorimeter (DSC) was used to determine the glass transition temperature and hence the degree of curing. Several samples of epoxy were prepared at different pre-curing and post-curing temperatures and durations. Pre-curing temperatures ranging from 80 to 150°C and post-curing temperatures ranging from 150 to 200°C were studied. The results show that the optimum pre-curing and post-curing temperatures are 100 and 170°C, respectively. Regarding the effect of curing duration, several specimens were prepared at the same pre-curing and post-curing temperatures with different curing durations of 1, 2, and 3 hours. It was observed that beyond one hour curing, the changes in the Tg and the degree of crosslinking were negligible. Using these optimum conditions samples of epoxy-clay nanocomposites were prepared using ultrasonication. The results showed that the addition of nonoclay to epoxy resulted in a reduction of the Tg.Keywords
This publication has 11 references indexed in Scilit:
- Experimental and numerical investigations on flexural and thermal properties of nanoclay–epoxy nanocompositesMaterials Science and Engineering: A, 2010
- Effect of the type of alkylammonium ion clay modifier on the structure and thermal/mechanical properties of glassy and rubbery epoxy–clay nanocompositesEuropean Polymer Journal, 2010
- Effect of temperature, duration and speed of pre-mixing on the dispersion of clay/epoxy nanocompositesComposites Science and Technology, 2009
- New organophilic agents of montmorillonite used as reinforcing agent in epoxy nanocompositesPolymer Testing, 2008
- Deformation mechanism of epoxy/clay nanocompositeEuropean Polymer Journal, 2007
- Effect of processing parameters and clay volume fraction on the mechanical properties of epoxy-clay nanocompositesJournal of Materials Science, 2006
- DSC investigation of the hindered effect on curing behavior for epoxy–phenol/MMT nanocomposites based on the acidic octadecylamine modifierPolymer, 2006
- Fracture toughness and water uptake of high-performance epoxy/nanoclay nanocompositesComposites Science and Technology, 2005
- Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced compositesComposites Science and Technology, 2005
- Epoxy Nanocomposites with Highly Exfoliated Clay: Mechanical Properties and Fracture MechanismsMacromolecules, 2005