Cyano‐Coordinated Tin Halide Perovskites for Wearable Health Monitoring and Weak Light Imaging
- 8 March 2024
- journal article
- research article
- Published by Wiley in Advanced Materials
- Vol. 36 (24) , e2400090
Abstract
Low‐toxicity tin halide perovskites with excellent optoelectronic properties are promising candidates for photodetection. However, tin halide perovskite photodetectors have suffered from high dark current owing to uncontrollable Sn2+ oxidation. Here, 2‐cyanoethan‐1‐aminium iodide (CNI) is introduced in CH(NH2)2SnI3 (FASnI3) perovskite films to inhibit Sn2+ oxidation by the strong coordination interaction between the cyano group (C≡N) and Sn2+. Consequently, FASnI3‐CNI films exhibit reduced nonradiative recombination and lower trap density. The self‐powered photodetector based on FASnI3‐CNI exhibits low dark current (1.04 × 10−9 A cm−2), high detectivity (2.2 × 1013 Jones at 785 nm), fast response speed (2.62 µs), and good stability. Mechanism studies show the increase in the activation energy required for thermal emission and generated carriers, leading to a lower dark current in the FASnI3‐CNI photodetector. In addition, flexible photodetectors based on FASnI3‐CNI, exhibiting high detectivity and fast response speed, are employed in wearable electronics to monitor the human heart rate under weak light and zero bias conditions. Finally, the FASnI3‐CNI perovskite photodetectors are integrated with a 32 × 32 thin‐film transistor backplane, capable of ultraweak light (170 nW cm−2) real‐time imaging with high contrast, and zero power consumption, demonstrating the great potential for image sensor applications.Keywords
Funding Information
- National Natural Science Foundation of China (22179131, 21503011, 52025028)
- Fundamental Research Funds for the Central Universities
- University of Chinese Academy of Sciences
This publication has 70 references indexed in Scilit:
- Sn‐Based Self‐Powered Ultrafast Perovskite Photodetectors with Highly Crystalline Order for Flexible Imaging ApplicationsAdvanced Functional Materials, 2023
- Stabilization of Perovskite Lattice and Suppression of Sn2+/Sn4+ Oxidation via Formamidine Acetate for High Efficiency Tin Perovskite Solar CellsAdvanced Functional Materials, 2023
- Prevention of Noise Current Generation in Tin‐Based Lead‐Free Perovskites for Highly Sensitive PhotodetectionAdvanced Functional Materials, 2022
- Acetic Acid‐Assisted Synergistic Modulation of Crystallization Kinetics and Inhibition of Sn2+ Oxidation in Tin‐Based Perovskite Solar CellsAdvanced Functional Materials, 2021
- Progress of Lead‐Free Halide Perovskites: From Material Synthesis to Photodetector ApplicationAdvanced Functional Materials, 2020
- Enhanced On–Off Ratio Photodetectors Based on Lead‐Free Cs3Bi2I9 Single Crystal Thin FilmsAdvanced Functional Materials, 2020
- A Review on Organic–Inorganic Halide Perovskite Photodetectors: Device Engineering and Fundamental PhysicsAdvanced Materials, 2017
- Full Dynamic‐Range Pressure Sensor Matrix Based on Optical and Electrical Dual‐Mode SensingAdvanced Materials, 2017
- A Self‐Powered, Sub‐nanosecond‐Response Solution‐Processed Hybrid Perovskite Photodetector for Time‐Resolved Photoluminescence‐Lifetime DetectionAdvanced Materials, 2016
- Resolving Weak Light of Sub‐picowatt per Square Centimeter by Hybrid Perovskite Photodetectors Enabled by Noise ReductionAdvanced Materials, 2015